300-610 Free Update With 100% Exam Passing Guarantee [2021]
[Oct-2021] Verified Cisco Exam Dumps with 300-610 Exam Study Guide
NEW QUESTION 72
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
- B. NPV feature on the Cisco MDS Series.
- C. Smart Zoning feature on the Cisco UCS Fabric Interconnects
- D. NPIV feature on the Cisco MDS Series
- E. end-host mode feature on the Cisco UCS Fabric Interconnects
Answer: B,D
NEW QUESTION 73
An engineer must configure an interface for managing and orchestrating a Cisco Nexus device. The interface must be operational if the data and control planes crash, support IPv4 and IPv6 addressing, and have been access to its own VRF instance. Which interface should be used to meet these requirements?
- A. management interface
- B. interface VLAN
- C. Physical interface
- D. lookup
Answer: A
NEW QUESTION 74
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
- B. NPV feature on the Cisco MDS Series.
- C. Smart Zoning feature on the Cisco UCS Fabric Interconnects
- D. NPIV feature on the Cisco MDS Series
- E. end-host mode feature on the Cisco UCS Fabric Interconnects
Answer: B,D
Explanation:
Section: Compute Design
NEW QUESTION 75
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Answer:
Explanation:
NEW QUESTION 76
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION 77
Refer to the exhibit.
Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?
- A. Initial
- B. Primary
- C. Secondary
- D. Updating
Answer: A
NEW QUESTION 78
Which address pool is used when a vHBA template is created?
- A. IP
- B. WWPN
- C. MAC
- D. UUID
Answer: B
NEW QUESTION 79
A network architect must design a large-scale Cisco SAN topology. The customer has a limited budget, so a design that provides use of resources is required. To support this requirement, the architect to share array ports, ISL, and line card bandwidth. The customer has also presented these additional considerations:
The customers plans to expand the network by 10% over the next two years.
The customer's policy requires physically separated infrastructure to support high availability.
Which solution should be used to meet these requirements?
- A. Edge-core-edge
- B. Mesh
- C. Collapsed-core
- D. Core-edge
Answer: D
Explanation:
Please review this question.
NEW QUESTION 80
Which two configuration methods can be used to deploy QoS to Cisco MDS Series switches? (Choose two.)
- A. multiple QoS policies that match individual devices
- B. FCoE VLAN-based QoS
- C. VSAN-based QoS
- D. multiple QoS policies that match multiple devices
- E. zone-based QoS
Answer: C,E
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/7_3/configuration/qos/ cisco_mds9000_qos_config_guide/configuring_qos.html
NEW QUESTION 81
Refer to the exhibit.
Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?
- A. Initial
- B. Primary
- C. Secondary
- D. Updating
Answer: A
NEW QUESTION 82
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION 83
The management of the Cisco Nexus switches is provided over an isolated put-of-band network. The VDC feature is configured on the Cisco Nexus core switches. How is out-of-band management access provided for each VDC?
- A. Each VDC has a unique out-of-band IP address from different IP subnets among VDCs.
- B. Each VDC has a unique out-of-band IP address from the same IP subnet.
- C. Each VDC has a dedicated out-of-band Ethernet management port.
- D. All the VDC have the same out-of-band IP address.
Answer: B
NEW QUESTION 84
Which feature must be configured to connect a classical Ethernet network to a data center network so that the data center network appears to be one large switch.
- A. VPC+
- B. UDLD
- C. EVPN
- D. OSPF
Answer: C
Explanation:
Section: Network Design
NEW QUESTION 85
Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?
- A. LLDP
- B. UDLD
- C. BFD
- D. MCP
Answer: B
NEW QUESTION 86
Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?
- A. NPIV mode
- B. FC end-host mode
- C. NPV mode
- D. FC switching mode
Answer: D
Explanation:
Explanation
Section: Storage Network Design
NEW QUESTION 87
What influences the number of ISLs that are required between Cisco MDS Series switches?
- A. type of storage
- B. end-to-end oversubscription ratio
- C. FCoE protocol
- D. N Port virtualization
Answer: B
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9700-series-multilayer- directors/white-paper-c11-729697.html
NEW QUESTION 88
A cloud service provider is managing day-2 operations of over 200 blade servers installed in the Cisco UCS environment. This pool of network resources is providing virtual networks to their customers. To successfully operate this environment, frequent changes to vNICs and other operational policies are required across multiple UCS domains. The operations team must streamline these repetitive tasks. Which orchestration tool must be used to meet this requirement?
- A. Cisco ACI Multisite Orchestrator
- B. Cisco UCS Manager
- C. Cisco UCS Director
- D. Cisco DAN Center
Answer: A
NEW QUESTION 89
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 90
When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?
- A. Layer 4 to Layer 7 device package
- B. inline load-balancing device
- C. BGP ECMP
- D. ITD
Answer: A
NEW QUESTION 91
Which pools are used when a vNIC template is created in Cisco UCS Manager?
- A. IP
- B. MAC
- C. WWPN
- D. UUID
Answer: B
NEW QUESTION 92
What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)
- A. VRF-Lite interfaces can be Layer 2.
- B. Interfaces that belong to VRFs can be physical or logical.
- C. VRF-Lite interfaces support MPLS.
- D. Overlapping IP addresses are permitted on different VRFs.
- E. Layer 3 interfaces can belong to multiple VRFs.
Answer: B,D
NEW QUESTION 93
Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?
- A. GPU support
- B. processor count
- C. network speed
- D. storage capacity
Answer: D
Explanation:
Section: Storage Network Design
NEW QUESTION 94
......
Authentic Best resources for 300-610 Online Practice Exam: https://www.realvce.com/300-610_free-dumps.html
300-610 Test Engine Practice Exam: https://drive.google.com/open?id=1qJSg1dbNe7p1FBCHStbmMWIyViA1WD5C