[Q117-Q140] Download Cisco 300-610 Sample Questions [May-2023]

Share

Download Cisco 300-610 Sample Questions [May-2023]

Real 300-610 Exam Questions and Answers FREE

NEW QUESTION # 117
Which two naming formats identify target or initiator iSCSI nodes? (Choose two.)

  • A. WWN
  • B. EUI
  • C. IQN
  • D. OUI
  • E. WWPN

Answer: A,C


NEW QUESTION # 118
A company has several data centers around the world that must be interconnected over Layer2. The service provider supports MPLS services to all the locations. The proposed solution must be vendor agnostic and scalable enough to support the rapid growth of the company. Which data center technology is recommended to achieve this goal?

  • A. EoMPLS
  • B. OTV
  • C. FabricPath
  • D. VXLANEVPN

Answer: D


NEW QUESTION # 119
A company purchased a Cisco UCS system with four 5108 Chassis populated with UCS B-Series servers. The environment consists of nine Cisco HyperFlex rack servers. An engineer must provision virtual machines using an orchestration tool to optimize overall deployment time.
Which orchestration must be used to meet this requirement?

  • A. Cisco Network Assurance
  • B. Cisco AppDynamic
  • C. Cisco DNA Center
  • D. Cisco Intersight

Answer: D


NEW QUESTION # 120
An end user is experiencing network latency when accessing a database in a disaster recovery site. The monitoring team concluded that the database was writing simultaneously to the storage arrays on the primary and disaster recovery sites.
Which design resolves this issue?

  • A. FCoE tunnel between data center
  • B. synchronous replication between data centers
  • C. FCIP tunneling between data center
  • D. asynchronous replication between data centers

Answer: D


NEW QUESTION # 121
An engineer develops a framework for automatic repetitive tasks needed to manage a Cisco Nexus 9000 Series Switch. The engineer plans to use a programmatic interface and must keep these considerations in mind.
* The customer's environment requires the script to authenticate before executing further actions.
* The customer's security requirements mandate the use of HTTP transport.
* The automation team is familiar with parsing messages encoded in XML or JSON format.
Which solution meets these requirements?

  • A. SNMPv3
  • B. RESTCONF
  • C. gRPC
  • D. NX-API

Answer: D


NEW QUESTION # 122
A company must introduce a scalable network automation tool to deploy, configure, and manage thousands of network devices and servers. The company servers already have been security-hardened and must not have any additional software installed on them. The security policy mandates the use of a secure communication protocol that supports authentication and encryption for managing the servers.
Which two automation tools must be used to meet these requirements? (Choose two.)

  • A. Puppet
  • B. SaltStack
  • C. CFEngine
  • D. Ansible
  • E. Chef

Answer: A,B


NEW QUESTION # 123
DRAG DROP
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Select and Place:

Answer:

Explanation:

Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/ whitepaper_c11-701962.html


NEW QUESTION # 124
Drag and drop the technologies from the left onto the correct descriptions on the right.

Answer:

Explanation:


NEW QUESTION # 125
Refer to the exhibit In this scenario a Cisco engineer is building a loop-free topology where a dedicated layer of the vPC domain adjacent to the aggregation layer which also runs vPC Is used to interconnect the two data centers together. The engineer globally configures a vPC domain identifier on both vPC devices where the domain ID is the same on both peer devices. Which action successfully forms the domain?

  • A. Configure vPC-peer-keepalive link on both peer devices
  • B. Put peer device interfaces into a suspended state.
  • C. Synchronize the MAC addresses for the member ports
  • D. Enable and reuse an ISL Layer 3 trunk port channel

Answer: A


NEW QUESTION # 126
Refer to the exhibit.

A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?

  • A. Each uplink that connects an IOM is configured as a discrete link.
  • B. The port channel is disabled until an administrator enables it manually.
  • C. Cisco UCS Manager creates two separate fabric port channels.
  • D. Cisco UCS Manager creates a single fabric port channel.

Answer: C


NEW QUESTION # 127
Refer to the exhibit.

The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?

  • A. 2158 bytes
  • B. 2240 bytes
  • C. 2000 bytes
  • D. 9000 bytes

Answer: C


NEW QUESTION # 128
Refer to the exhibit.

Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?

  • A. Primary
  • B. Updating
  • C. Initial
  • D. Secondary

Answer: C


NEW QUESTION # 129
Which Cisco HyperFlex feature provides virtual machine-level cost scaling for desktop virtualization growth?

  • A. encryption offload cards
  • B. fabric interconnects
  • C. dedicated compute nodes
  • D. HyperFlex Edge support

Answer: D


NEW QUESTION # 130
An engineer must design a solution based on Cisco Nexus 7709 Switches. The solution must connect test and development network segments and separate the enterprise applications from the production network. The network security team requires routing instances and the IP stack to be completely separated from each other and for traffic between the environments to undergo a deep packet inspection. The development team also requests the ability to allocate additional physical interfaces from the Cisco Nexus 7709 device in each environment.
Which solution meets these requirements?

  • A. 1) Enable new routing instances for the testing and development environments in the same VDC.
    2) Control reachability by using firewall access policies.
  • B. 1) Create a separate VRF for the testing and development environments.
    2) Control reachability by using firewall access policies.
  • C. 1) Create a VRF for the testing and development environments.
    2) Use ACLs to control traffic between the two environments.
  • D. 1) Assign a separate VDC for the testing and development environments.
    2. Place a firewall between the VDCs.

Answer: B


NEW QUESTION # 131
The management of the Cisco Nexus switches is provided over an isolated put-of-band network. The VDC feature is configured on the Cisco Nexus core switches. How is out-of-band management access provided for each VDC?

  • A. Each VDC has a dedicated out-of-band Ethernet management port.
  • B. Each VDC has a unique out-of-band IP address from different IP subnets among VDCs.
  • C. All the VDC have the same out-of-band IP address.
  • D. Each VDC has a unique out-of-band IP address from the same IP subnet.

Answer: D


NEW QUESTION # 132
An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?

  • A. flow control
  • B. IP redirects
  • C. HSRP
  • D. proxy ARP

Answer: D

Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/lisp/configuration/guide/b_NX- OS_LISP_Configuration_Guide/b_NX-OS_LISP_Configuration_Guide_chapter_010.html


NEW QUESTION # 133
A client in a commercial building Installs a Cisco blade server in the multitenant Cisco UCS blade Infrastructure. To cut operating costs me client's data center is shared with other organizations. The client asks an engineer prevent third parties from accessing their equipment and from accessing BlOS-related information when booting a server. Which Two policies must be used to meet these requirements? (Choose two.)

  • A. ASPM support
  • B. front panel lockout
  • C. quiet boot
  • D. CDN control
  • E. post error pause

Answer: C,D

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Server-Mgmt/3-2/b_Cisco_UCS_Manager_Server_Mgmt_Guide_3_2/b_Cisco_UCS_Manager_Server_Mgmt_Guide_3_2_chapter_01110.html Quiet boot is what the BIOS displays during booting the server. If enabled, the BIOS displays the logo screen.
I believe that quiet boot and CDN control may have the customer name.


NEW QUESTION # 134
A company owns a large-scale compute infrastructure that consists of over 1000 servers and virtual machines. The operational complexity continues to grow with additional policies and servers added to the environment. An infrastructure engineer is looking for an automation tool to reduce the operational complexity of configuring complex infrastructure. Because of the strict security requirements, the tool must be agentless, use the secure shell for transport, and be extendable using existing Python modules. Which tool meets these requirements?

  • A. NSO
  • B. Saltstack
  • C. Puppet
  • D. Ansible

Answer: D


NEW QUESTION # 135
What are two functions of a Network Services Orchestrator in an NFV environment? (Choose two.)

  • A. It operates at the resource-facing services layer and provides overall lifecycle management at the network service level.
  • B. It operates at the customer-facing services layer and provides the management interface for the virtual network devices.
  • C. It provides a standards-based southbound interface for transparent integration with systems that operate at the customer-facing services layer.
  • D. It provides a standards-based northbound interface for transparent integration with systems that operate at the customer-facing services layer.
  • E. It provides an API-based northbound interface for transparent integration with systems that operate at the resource-facing services layer.

Answer: A,E


NEW QUESTION # 136
Drag and drop the technologies from the left onto the correct descriptions on the right.

Answer:

Explanation:


NEW QUESTION # 137
Refer to the exhibit.

A high-availability setup for iSCSI is designed with the host running ISCSI software. Each storage port on the MDS exports the same two Fibre Channel target ports with different ISCSI target names. In this design, how many ISCSI session are created from the host so that recovery occurs if any component fails?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

Explanation:
Reference:


NEW QUESTION # 138
Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?

  • A. FC switching mode
  • B. NPIV mode
  • C. FC end-host mode
  • D. NPV mode

Answer: A

Explanation:
Explanation
Section: Storage Network Design


NEW QUESTION # 139
Drag and drop the configurations from the left onto the correct policies on the right.

Answer:

Explanation:


NEW QUESTION # 140
......

Truly Beneficial For Your Cisco Exam: https://www.realvce.com/300-610_free-dumps.html

View All 300-610 Actual Exam Questions, Answers and Explanations for Free: https://drive.google.com/open?id=1kc7afRalnhH5eEg_jxgEiNQBxPdDEu0w