Certification Training for NS0-173 Exam Dumps Test Engine [2021]
Nov 19, 2021 Step by Step Guide to Prepare for NS0-173 Exam
Network Appliance NS0-173 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION 30
A customer is configuring the UCS to handle a multitenant environment. The customer has created an organization within UCS for each tenant and would like to allow access to these organizations for only users that belong to that tenant.
In this scenario, which feature in UCS Manager should the customer use to accomplish this task?
- A. Locales
- B. User Roles
- C. Service Profile
- D. Trusted Platform Module
Answer: C
NEW QUESTION 31
A service provider is designing a FlexPod configuration to host multiple customers in a hybrid cloud environment, where IP address-range conflicts might arise on the shared storage.
Which NetApp feature should be enabled to prevent these conflicts?
- A. SVMs
- B. IPspaces
- C. failover groups
- D. broadcast domains
Answer: B
NEW QUESTION 32
You are configuring high availability within the network layer of your FlexPod configuration.
In this scenario, what are two Cisco best practices for designing vPC on your Cisco 9000 Series switches?
(Choose two.)
- A. The vPC auto-recovery feature should be enabled.
- B. Peer keep-alive connectivity between the switches should be established.
- C. A minimum of four 10GB Ethernet connections are required for vPC.
- D. Port channels should be configured for LACP passive mode.
Answer: B,C
Explanation:
vPC also relies on the periodic keepalive messages to determine when one of the connected devices on the peer link fails.
vPC peer link - The link used to synchronize states between the vPC peer devices. Both ends must be on 10- Gigabit Ethernet or 40-Gigabit Ethernet interfaces.
Reference:
configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide/ b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_chapter_0111.html
NEW QUESTION 33
A customer wants to deploy FlexPod for a VDI solution with 10,000 users, each with 10 GB of storage allocated.
To support this configuration, which three components must be sized? (Choose three.)
- A. the Cisco UCS servers
- B. the 1GbE ports from user systems
- C. the optical cable length
- D. the NetApp AFF storage
- E. the fabric interconnect ports
Answer: A,B,E
NEW QUESTION 34
You are designing a FlexPod solution with a 2-node storage system, multiple compute chassis, and ACI.
In this scenario, which two network switches are required? (Choose two.)
- A. leaf switch
- B. core switch
- C. cluster interconnect switch
- D. spine switch
Answer: A,D
NEW QUESTION 35
Click the Exhibit button.
You have designed a FlexPod Express solution that uses a NetApp ONTAP controller, Cisco UCS C-Series servers, and Cisco Nexus 3000 Series switches, as shown in the exhibit. Which three storage protocols are supported in this design? (Choose three.)
- A. FC
- B. iSCSI
- C. NFS
- D. FCoE
- E. SMB
Answer: A,B,C
NEW QUESTION 36
A customer is planning to deploy a FlexPod solution for a large scale SAN requirement that uses the FC protocol. The customer plans to use Smart Zoning in the configurations to reduce the number of TCAM entries in the zoning process.
In this scenario, which design would enable the customer to use Smart Zoning?
- A. storage connected to Cisco MDS switches
- B. storage directly connected to Cisco UCS Fabric Interconnects
- C. storage connected to Cisco Nexus 5000 Series switches
- D. storage connected to Cisco Nexus 9000 Series switches
Answer: A
NEW QUESTION 37
A customer wants to extend a Layer 2 network over a Layer 3 Nexus 9000 infrastructure.
Which Layer 2 overlay scheme accomplishes this task?
- A. EIGRP
- B. vPC
- C. VXLAN
- D. STP
Answer: C
Explanation:
XLAN tunnels the Layer 2 network over the Layer.
NEW QUESTION 38
A customer wants to deploy a FlexPod solution that involves directly connecting the NetApp AFF storage using the FCoE protocol to the Cisco UCS Fabric Interconnects.
In this scenario, which Cisco UCS Fibre Channel mode would be used to accomplish this task?
- A. access mode
- B. end host mode
- C. trunk mode
- D. switching mode
Answer: D
NEW QUESTION 39
After you install a FlexPod infrastructure at a customer site, you need to migrate the existing Vmware virtual machines off the infrastructure that was used before FlexPod was installed.
Which VMware vSphere feature accomplishes this task?
- A. vSphere HA
- B. vSphere DRS
- C. VM Component Protection
- D. vMotion
Answer: D
NEW QUESTION 40
Click the Exhibit button.
You are designing a FlexPod Datacenter solution for Microsoft Windows 2012 with Hyper-V. All hosts will boot from the SAN, including management hosts. The management hosts are Cisco C-Series servers.
Referring to the exhibit, which adapters are required to boot the management servers from the SAN?
- A. two 1GbE NICs
- B. two 8Gb HBAs
- C. two 10GbE NICs
- D. two 10GbE CNAs
Answer: C
NEW QUESTION 41
An architect is designing a FlexPod environment with Cisco Nexus 5000 switches to SAN boot all of the ESXi hosts over FC.
In this scenario, what should the LUN ID number be?
- A. LUN 3
- B. LUN 1
Section: (none)
Explanation - C. LUN 0
- D. LUN 2
Answer: C
NEW QUESTION 42
A customer with a FlexPod Datacenter design that uses a 4-node FAS8200 for storage wants to add a new workload that requires high performance. The customer needs to nondisruptively move some workloads from the existing FAS system to the new storage.
Which storage system would satisfy the requirements?
- A. E2700
- B. EF570
- C. FAS2700
- D. AFF A300
Answer: B
NEW QUESTION 43
Click the Exhibit button.
A customer wants to ensure that FlexPod Datacenter connections to the storage layer are highly available. Which two configurations shown in the exhibit satisfy the customer's requirements? (Choose two.)
- A. IV
- B. II.
- C. I.
- D. III.
Answer: A,D
NEW QUESTION 44
Two data centers are 75km apart. The customer wants to deploy a FlexPod solution in each data center to maintain high availability between the two sites with minimal possible data loss.
In this scenario, which technology would you use at the NetApp storage layer?
- A. FlexArray
- B. SnapVault
- C. SnapMirror
- D. MetroCluster
Answer: D
NEW QUESTION 45
Your customer has a FlexPod configuration with a 4-node NetApp AFF A300 storage cluster that uses only NSE drives.
Which two solutions allow the customer to expand the current storage system? (Choose two.)
- A. a two-node FAS8200 with a 4 TB NL-SAS HDD
- B. a DS4246 with twenty-four 6 TB NL-SAS HDDs
- C. a DS224C with twenty-four 3.8 TB SSDs
- D. a two-node AFF A200 with a 3.8 TB NSE SSD
Answer: A,C
NEW QUESTION 46
You are a data center architect at a service provider. You need to configure a new multi-tenant FlexPod service offering.
Which three UCS Manager features will you need to accomplish this task? (Choose three.)
- A. policies
- B. virtualization support
- C. service profiles
- D. auto discovery
- E. role-based access control
Answer: A,C,E
NEW QUESTION 47
Which two NetApp storage controllers would be used in a valid FlexPod Datacenter configuration? (Choose two.)
- A. NetApp EF570
- B. NetApp FAS2700
- C. NetApp AFF A700
- D. NetApp E2800
Answer: B,C
NEW QUESTION 48
......
Ultimate Guide to Prepare NS0-173 Certification Exam for Cisco and NetApp FlexPod: https://www.realvce.com/NS0-173_free-dumps.html