[Nov 14, 2021] NS0-173 PDF Recently Updated Questions Dumps to Improve Exam Score
NS0-173 Dumps Full Questions with Free PDF Questions to Pass
Network Appliance NS0-173 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 5 |
|
NEW QUESTION 26
You are designing a FlexPod solution with a 2-node storage system, multiple compute chassis, and ACI.
In this scenario, which two network switches are required? (Choose two.)
- A. cluster interconnect switch
- B. leaf switch
- C. spine switch
- D. core switch
Answer: B,C
NEW QUESTION 27
A customer is designing a FlexPod Datacenter with Cisco UCS C-Series servers. They intend to manage the solution with Cisco UCS Manager. They want to cable the servers to the Cisco UCS Fabric Interconnects.
In this scenario, which three configurations are supported? (Choose three.)
- A. Multipath mode
- B. DualWire Management mode
- C. Cluster mode
- D. SingleConnect mode
- E. Direct Connect mode
Answer: B,D,E
Explanation:
Dual-wire Management (Shared LOM): Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management.
SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco VIC card connects one cable that can carry both data traffic and management traffic. This feature is referred to as SingleConnect.
Direct Connect Mode: Cisco UCS Manager supports an option to connect the Cisco UCS C-Series Rack- Mount Server directly to the FIs. This option enables Cisco UCS Manager to manage the Cisco UCS C- Series Rack-Mount Servers using a single cable for both management traffic and data traffic. The Cisco UCS VIC connects to the FI of the system. This connection uses a single connection from each VIC to each FI.
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm4-0/b_C-Series- Integration_UCSM4-0/b_C-Series-Integration_UCSM4-0_chapter_01.html
NEW QUESTION 28
A customer with a FlexPod Datacenter design that uses a 4-node FAS8200 for storage wants to add a new workload that requires high performance. The customer needs to nondisruptively move some workloads from the existing FAS system to the new storage.
Which storage system would satisfy the requirements?
- A. FAS2700
- B. AFF A300
- C. E2700
- D. EF570
Answer: D
NEW QUESTION 29
Your customer wants assurances that all aspects of FlexPod are highly available.
Which statement is correct in this scenario?
- A. Cisco UCS Manager maintains a replica of configuration information.
- B. Cisco UCS Manager automatically copies its configuration data to a remote data store.
- C. Cisco UCS Manager uses active-active architecture.
- D. Cisco UCS Manager contains multiple UCS domains.
Answer: A
Explanation:
The management and data plane of Cisco UCS is designed for high availability and redundant access layer fabric interconnects. In addition, Cisco UCS supports existing high availability and disaster recovery solutions for the data center, such as data replication and application-level clustering technologies.
NEW QUESTION 30
The storage administrator must change the vHBA settings bound to a template associated with a production server.
What happens when the settings are reconfigured in this scenario?
- A. The vHBA template is deleted from UCS Manager.
- B. The server that is associated with the service profile reboots.
- C. The service profile template that is associated with the server is initialized.
- D. The vHBA configuration change does not affect LUN access.
Answer: C
NEW QUESTION 31
Click the Exhibit button.
You have designed a FlexPod Express solution that uses a NetApp ONTAP controller, Cisco UCS C-Series servers, and Cisco Nexus 3000 Series switches, as shown in the exhibit. Which three storage protocols are supported in this design? (Choose three.)
- A. NFS
- B. FC
- C. iSCSI
- D. SMB
- E. FCoE
Answer: A,B,C
NEW QUESTION 32
Two data centers are 75km apart. The customer wants to deploy a FlexPod solution in each data center to maintain high availability between the two sites with minimal possible data loss.
In this scenario, which technology would you use at the NetApp storage layer?
- A. SnapVault
- B. MetroCluster
- C. FlexArray
- D. SnapMirror
Answer: B
NEW QUESTION 33
A customer is designing a FlexPod solution to use both NFS and iSCSI for connectivity, including traditional FC for legacy applications. The Cisco UCS Fabric Interconnects will be connected to both Nexus 9000 Series switches and FC switches.
Which UCS capability allows you to accomplish this task?
- A. VSANs
- B. SAN pin groups
- C. FC uplink ports
- D. unified ports
Answer: D
NEW QUESTION 34
A customer is using a FlexPod implementation that has 10 Gbps uplinks from the B-Series chassis to the fabric interconnect. The customer wants to upgrade the links to 40 Gbps.
In this scenario, which model of Cisco UCS server IOM is required?
- A. 0
- B. 2204XP.
- C. 2208XP
- D. 1
Answer: B
Explanation:
The Cisco UCS 2204XP Fabric Extender (Figure 7) has four 10 Gigabit Ethernet, FCoE-capable, SFP+ ports that connect the blade chassis to the fabric interconnect.
NEW QUESTION 35
You are configuring a FlexPod system for NAS protocols. You want to ensure that there are multiple paths between the initiators and targets in the solution.
Which two steps will accomplish this task? (Choose two.)
- A. Disable LACP.
- B. Allow the VLANs over the vPC peer link.
- C. Configure the VLANs in Cisco UCS Manager as Common/Global.
- D. Configure the VSANs in the Cisco Nexus 5000 switches.
Answer: A,C
NEW QUESTION 36
After you install a FlexPod infrastructure at a customer site, you need to migrate the existing Vmware virtual machines off the infrastructure that was used before FlexPod was installed.
Which VMware vSphere feature accomplishes this task?
- A. vSphere HA
- B. VM Component Protection
- C. vSphere DRS
- D. vMotion
Answer: D
NEW QUESTION 37
A customer with a FlexPod Express solution wants to enable remote access to the NetApp storage component.
In this scenario, which two access methods are recommended? (Choose two.)
- A. RDP
- B. Telnet
- C. SSH
- D. SAML
Answer: B,C
NEW QUESTION 38
A customer has verified physical connectivity on the FlexPod. However, the LUNs are not available on the Cisco UCS server. To make the LUNs visible to the UCS, the customer must enable a switching feature for zoning.
In this scenario, what should the customer do?
- A. Enable the device connector feature in Cisco UCS Manager.
- B. Enable Spine mode on all the Cisco Nexus 9000 switches.
- C. Enable NPV on all switches.
- D. Enable NPIV on all switches.
Answer: A
NEW QUESTION 39
An architect is designing a FlexPod environment with Cisco Nexus 5000 switches to SAN boot all of the ESXi hosts over FC.
In this scenario, what should the LUN ID number be?
- A. LUN 3
- B. LUN 0
- C. LUN 1
Section: (none)
Explanation - D. LUN 2
Answer: B
NEW QUESTION 40
A FlexPod solution has been configured for iSCSI SAN boot with multiple paths between the server and the storage.
In this scenario, how many initiators (IQNs) per server will need to be added in the corresponding igroup in ONTAP?
- A. one
- B. four
- C. two
- D. three
Answer: B
Explanation:
The initator group REST API allows you to create, update, delete, and discover initiator groups, and add and remove initiators that can access the target and associated LUNs.
NEW QUESTION 41
A customer is evaluating management tools for a new FlexPod infrastructure. They desire a tool that can orchestrate the provisioning of UCS compute nodes, NetApp storage, and VMware networking.
Which tool satisfies the requirements of this customer's heterogeneous environment?
- A. NetApp OnCommand Insight
- B. UCS Central
- C. UCS Director
- D. NetApp OnCommand Unified Manager
Answer: C
NEW QUESTION 42
A client has a FlexPod Datacenter solution with four active fabric links in port channel mode established between the Cisco Fabric Interconnects and the IOMs on a Cisco 5108 blade chassis. The blade chassis is fully populated with Cisco UCS B200M5 blades. A worker in the data center inadvertently unplugs the fourth uplink cable from IOM-A while working in the rack.
In this scenario, what happens to the network traffic?
- A. Connectivity for servers 3, 4, 7, and 8 all fail over to IOM-B.
- B. There is a loss of connectivity for servers 4 and 8.
- C. Traffic is load-balanced within IOM-A.
- D. Traffic is load-balanced within IOM-B.
Answer: A
NEW QUESTION 43
......
100% Updated Network Appliance NS0-173 Enterprise PDF Dumps: https://www.realvce.com/NS0-173_free-dumps.html