Share Latest Aug-2025 Senior-Internal-Corrosion-TechnologistTest Practice Test Questions, Exam Dumps
Positive Aspects of Valid Dumps Senior-Internal-Corrosion-Technologist Exam Dumps!
NEW QUESTION # 12
You are working as an Inspector in a galvanizing plant for the first time. What are some of the hazards you need to be aware of:
- A. Risk of chemical exposure
- B. Risk of acid or caustic splashes
- C. Risk of skin burns
- D. a), b), and c)
Answer: D
NEW QUESTION # 13
Application of Thermal Spray Coatings requires:
- A. Specialized skills supported by training and experience
- B. The same skills as welding
- C. The same skills as liquid coatings
- D. No particular skills
Answer: A
NEW QUESTION # 14
NACE Standards Include:
- A. a) only
- B. Standard Practices
- C. Material Requirements
- D. a) & b)
Answer: D
NEW QUESTION # 15
Non-Conformance Reports are designed to:
- A. Elevate the status of the Inspector
- B. Assist the Owner in negotiating credits from the Contractor
- C. To Identify items that do not meet the specification requirements
- D. Punish the Contractor for substandard work
Answer: C
NEW QUESTION # 16
Which product, when closely inspected has a green or ted layer of fusion bonded epoxy (FBE) that is visible directly on the steel?
- A. 3-Layer Polyethylene (PE)
- B. Fusion Bonded Epoxy
- C. 2-Layer Polyethylene (PE)
- D. Coal Tar Enamel
Answer: B
NEW QUESTION # 17
On pipelines, which coating is Identifiable by Its distinct colors, usually light blue, green, or grey?
- A. Liquid epoxies
- B. Concrete
- C. Coal Tar Enamel
- D. Heat-shrink sleeves
Answer: A
NEW QUESTION # 18
In which type of concrete are laitance commonly encountered?
- A. Glass fiber cement
- B. Gunite
- C. Poured (wet cast)
- D. Concrete block (pouted with a form)
Answer: C
NEW QUESTION # 19
The Inspectors' goal at the Pre-Job Conference is to:
- A. Discuss contractual requirements
- B. Manage the meeting so it doesn't go off topic
- C. Obtain a clear understanding of the Specification
- D. Take accurate meeting minutes for distribution
Answer: C
NEW QUESTION # 20
W3-1 is always performed using UHWJ at pressures above 210 MPa (30,000 PS1)
- A. True
- B. False
Answer: B
NEW QUESTION # 21
External coatings applied to burled pipelines are generally tested for:
- A. Chalking resistance
- B. Gloss level
- C. Cathodic disbondment
- D. Solvent resistance
Answer: C
NEW QUESTION # 22
You have Just received your NACE CIP Level 2 certification when you are asked to supervise a team of uncertified field pipeline inspectors.
Your FIRST preferred course of action is to:
- A. Advise the prospective employer that you cannot accept the position
- B. Accept the assignment without hesitation
- C. Review the NACE Attestation prior to making a decision
- D. Meet with the prospective employer to determine the scope of your role
Answer: D
NEW QUESTION # 23
Which type of pipelines collect the gas from the transmission system so utility companies can distribute the gas to end users?
- A. Midstream
- B. Gathering
- C. Transmission
- D. Distribution
Answer: A
NEW QUESTION # 24
Surface preparation methods for Non-ferrous metals are:
- A. The same as for Ferrous metals
- B. The same for all Non-Ferrous metals
- C. Not required
- D. Specific for each type of Non-Ferrous metal
Answer: D
NEW QUESTION # 25
Which product Is used in conjunction with other coatings such as FBE when the lines run through wetlands or a body of water?
- A. 3-Layer Polyethylene (PE)
- B. Coal Tar Enamel
- C. Concrete
- D. 2-Layer Polyethylene (PE)
Answer: B
NEW QUESTION # 26
From a corrosion perspective, the main difference between Ferrous and Non-Ferrous Metals Is:
- A. Cost
- B. Appearance
- C. Iron content
- D. Safety
Answer: C
NEW QUESTION # 27
You are a NACE Level 2 in-house inspector working in a shop. Your In-house UP requires you to perform a sleeve test to test for soluble sails; however the 3rd party NACE Level 3 inspector, representing the owner, has used a salt smart meter and has achieved a very different result and has rejected the pre cleaning.
Your FIRST preferred course of action is to:
- A. Advise the other Inspector he is using an Incorrect method
- B. Redo the pre-cleaning based on the other Inspectors results
- C. Advise your QC Manager to change the UP to the use of the salt smart meter
- D. Review the specification with the other inspector to see what method was specified
Answer: D
NEW QUESTION # 28
The standards defining surface cleanliness achieved by centrifugal blast cleaning are:
- A. The same as air blast cleaning
- B. Slightly different to air blast cleaning
- C. Comparable to air blast cleaning
- D. Different than air blast cleaning
Answer: A
NEW QUESTION # 29
Coating Surveys are legally required:
- A. On commercial marine vessels and offshore platforms
- B. On food and beverage vessels and can linings
- C. On high pressure gas lines and fireproofed structures
- D. On water tanks and potable water pipelines
Answer: A
NEW QUESTION # 30
The solvent sensitivity/solvent wipe test (ASTM D4752) is used to determine the cute of
- A. powder coatings.
- B. inorganic zincs.
- C. urethanes.
- D. epoxies.
Answer: B
NEW QUESTION # 31
When performing a hardness test on a coating which has elastic properties the inspector is likely to observe:
- A. A very low reading
- B. No difference from any other coating
- C. A very high reading
- D. Cold (low or creep
Answer: D
NEW QUESTION # 32
Which standards are generally established by private-sector bodies and are available for use by any person or organization, private or government?
- A. Consensus
- B. Voluntary
- C. Mandatory
- D. Defector
Answer: A
NEW QUESTION # 33
Individuals conducting Coating Surveys should:
- A. Always be trained and experienced Coating Industry
- B. Always be NACE Level 3 Certified Inspectors
- C. Always be experienced Specification Writers
- D. Always be NACE or 5SPC Protective Coating Specialists
Answer: B
NEW QUESTION # 34
NACE/SSPC Water Jetting standards are directly equivalent to ISO Abrasive Blast Standards:
- A. False
- B. True
Answer: B
NEW QUESTION # 35
Because a NACE Level 2 Inspector has been trained in specific destructive tests, it is up to the Inspector to decide If and when a destructive test is required.
- A. True
- B. False
Answer: B
NEW QUESTION # 36
......
Practice LATEST Senior-Internal-Corrosion-Technologist Exam Updated 102 Questions: https://www.realvce.com/Senior-Internal-Corrosion-Technologist_free-dumps.html
First Attempt Guaranteed Success in Senior-Internal-Corrosion-Technologist Exam: https://drive.google.com/open?id=1A54RtGbkrzFdI_niosEU6boxSu4OK2zT