New (2023) Cisco 350-801 Exam Dumps [Q69-Q84]

New (2023) Cisco 350-801 Exam Dumps

Best Way To Study For Cisco 350-801 Exam Brilliant 350-801 Exam Questions PDF

NEW QUESTION # 69
Which two approaches are taken to implement CAC within Cisco UCM in full-mesh topology? (Choose two.)

A. physical location
B. location-based CAC
C. RSVP-enabled locations
D. Audio Codec Preference List
E. device pool

Answer: B,E

NEW QUESTION # 70
What is a capability of the call forwarding feature in a Cisco Webex dial plan?

A. device pool selection
B. Call Admission Control
C. business continuity
D. ringtone selection

Answer: C

Explanation:
Call forwarding is a feature that allows users to forward incoming calls to another number. This can be useful in a number of situations, such as when a user is not available to take a call, or when a user wants to forward calls to a different number during certain times of the day.
Call forwarding can be used to improve business continuity by ensuring that calls are always answered, even if the user is not available. For example, if a user is out of the office, they can forward their calls to their voicemail or to another employee. This ensures that customers and clients can always reach someone, even if the user is not available.

NEW QUESTION # 71
Endpoint A is attempting to call endpoint
B. Endpoint A only supports G.711ulaw with a packetization rate of 20 ms, and endpoint B supports packetization rate of 30 ms for G.711ulaw. Which two media resources are allocated to normalize packetization rates through transrating? (Choose two.)

A. software MTP on Cisco UCM
B. software transcoder on Cisco UCM
C. software MTP on Cisco IOS Software
D. hardware MTP on Cisco IOS Software
E. hardware transcoder on Cisco IOS Software

Answer: A,B

Explanation:
Section: Protocols, Codecs, and Endpoints

NEW QUESTION # 72
An administrator must configure the local route group feature on cisco UCM.
Which step will enable this feature?

A. For each route group, check the box for the Local Route Group feature.
B. For each route list configure a route group to use as a Local Route Group.
C. For each route pattern, select the Local Route Group as the destination.
D. For each device pool, configure a route group to use as a Local Route Group for that device pool

Answer: D

Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_ F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features- services-guide-100_chapter_0100110.html

NEW QUESTION # 73
An administrator executes the debug isdn q931 command while debugging a failed call.
After a test call is placed, the logs return a disconnect cause code of 1.
What is the cause of this problem?

A. The destination number is busy
B. The destination number rejects the call
C. The dialed number is not assigned to an endpoint
D. The media resource is unavailable

Answer: C

Explanation:
https://www.cisco.com/c/en/us/support/docs/dial-access/integrated-services-digital-networks-isdn- channel-associated-signaling-cas/8607-isdn-disc- code.html

NEW QUESTION # 74
How can an engineer determine location-based CAC bandwidth requirements for Cisco Unified communication Manager?

A. Execute the Resource Reservation protocol to return location-based requirements.
B. Calculate the number of calls against the license for Cisco Unified Border Element to determine calls per location.
C. Add the requirements for each audio and video codec and how many calls must be supported.
D. Set the requirements in the service parameters.

Answer: C

Explanation:
CAC is configured in location, and is the total bandwidth for all calls.

NEW QUESTION # 75
An administrator works with an ISDN PRI that is connected to a third-party PBX.
The ISDN link does not come up; and the administrator finds that the third-party PBX uses the QSIG signalling method.
Which command enables the Cisco IOS Gateway to use QSIG signalling on the ISDN link?

A. isdn switch-type primary-qsig
B. isdn switch-type basic-qsig
C. isdn switch-type basic-ni
D. isdn incoming-voice voice

Answer: A

Explanation:
The switch type confiugred must be QSIG:
isdn switch-type primary-qsig
https://community.cisco.com/t5/collaboration-knowledge-base/qsig/ta-p/3126953

NEW QUESTION # 76
An engineer is asked to implement on-net/off-net call classification in Cisco UCM Which two components are required to implement this configuration? (Choose two)

A. SIP route patterns
B. route group
C. route pattern
D. CTI route point
E. SIP trunk

Answer: D,E

NEW QUESTION # 77
A customer is deploying a SIP IOS gateway for a customer who requires that in-band DTMF relay is first priority and out-of-band DTMF relay is second priority.
Which IOS entry sets the required priority?

A. dtmf-relay sip-kpml cisco-rtp
B. sip-notify dtmf-relay rtp-nte
C. dtmf-relay rtp-nte sip-notify
D. dtmf-relay cisco-rtp

Answer: C

NEW QUESTION # 78
An incoming off-net call to a user fails. An engineer notices that the off-net call is G.711, but the phone accepts only G.729. Which media resource on a Cisco Unified Border Element and Cisco Unified Communications Manager must the engineer configure to manage the codec negotiation?

A. CFB
B. transcoder
C. MTP
D. MOH

Answer: B

NEW QUESTION # 79
An administrator is designing a new Cisco UCM for a company with many departments and firm structure on their communications policies. The administrator must make sure that these communication policies are reflected in the phone system setup. Certain departments cannot be accessed directly, even if they have dedicated DID numbers. Some phones, especially public phones, must not be able to dial international numbers Which type of function is configured to control which device is allowed to call another device in Cisco UCM?

A. regions and device pools
B. partitions and calling search spaces
C. calling patterns and route patterns
D. links and pipes

Answer: B

NEW QUESTION # 80
On which Cisco Unified Communications Manager nodes can the TFTP service be enabled?

A. Any node
B. Any two nodes
C. Any subscriber nodes
D. Only nodes that have Cisco Unified CM service enabled

Answer: B

NEW QUESTION # 81
Why would we not include an end user's PC device in a QoS trust boundary?

A. The end user could incorrectly tag their traffic to bypass firewalls.
B. The end user may incorrectly tag their traffic to be prioritized over other network traffic.
C. The end user could incorrectly tag their traffic to advertise their PC as a default gateway.
D. There is no reason not to include an end user's PC device in a QoS trust boundary.

Answer: B

Explanation:
Section: QoS

NEW QUESTION # 82
A customer asked to integrate Unity Connection with Cisco UCM using SIP protocol Which two features must be enabled on SIP security profiles? (Choose two)

A. Accept presence subscription
B. Accept unsolicited notification
C. Allow charging header
D. Accept replaces header
E. Enable application level authorization.

Answer: B,D

NEW QUESTION # 83
A collaboration engineer must configure Cisco Unified Border Element to support up to five concurrent outbound calls across an Ethernet Link with a bandwidth of 160 kb to the Internet Telephony service provider.
Which set of commands allows the engineer to complete the task without compromising voice quality?
A)

B)

C)

D)