Symantec 250-587 Test Engine Dumps Training With 303 Questions
250-587 Questions Pass on Your First Attempt Dumps for Symantec Certified Specialist Certified
NEW QUESTION # 86
You are monitoring a file system on a Solaris operating system using Veritas Volume Manager when the following kernel message appears: WARNING. msgcnt x: mesg 069: V-2-69: memory usage specified by the vxfs:vxfs_ninode and vxfs:vx_bc_bufhwm parameters exceeds available memory; the system may hang under heavy load. You need to resolve this error. What should you do?
- A. Increase the value of one or both parameters to 100% of physical memory or to 100% of kernel virtual memory
- B. Leave the parameters at current levels and disregard the system message because it is a false message.
- C. Remove either the physical memory parameter or the kernel virtual memory parameter.
- D. Reduce the value of one or both parameters to less than 50% of physical memory or to 66% of kernel virtual memory
Answer: D
NEW QUESTION # 87
Which interface provides single sign-on access for the purpose of administering Data Loss Prevention servers, managing policies, and remediating incidents?
- A. Symantec Messaging Gateway
- B. Symantec Information Manager
- C. Symantec Data Insight
- D. Symantec Protection Center
Answer: D
NEW QUESTION # 88
Which traffic type is excluded from analysis when an administrator uses Network Monitor?
- A. Yahoo! Instant Messenger
- B. NNTP
- C. Telnet
- D. Skype
Answer: D
NEW QUESTION # 89
You are responsible for managing Veritas Storage Foundation for Oracle. While working on the Veritas Storage Foundation for Oracle with Quick I/O feature, you execute the command #mount - F vxfs -o noqio /dev/vx/dsk/testdg/testvol1 /testvol1. What would be the expected outcome for this command?
- A. It enables the Quick I/O feature when the file system is online.
- B. It unmounts the file system and disables the Quick I/O feature.
- C. It enables the Quick I/O feature for Oracle when file system is being mounted.
- D. It disables the Quick I/O feature for Oracle when file system is being mounted.
Answer: D
NEW QUESTION # 90
You administer the Storage Foundation 5.0 environment in your organization. A particular file system displays some odd I/O characteristics. Before you proceed, you decide to take a look at the current I/O parameters. Which command will you use to print the current values of the I/O parameters?
- A. tunefstab
- B. vol_maxio
- C. read_pref_io
- D. vxtunefs
Answer: D
NEW QUESTION # 91
An incident responder can see basic incident data, but is unable to view specific details of the incident. What could be wrong with the configuration in the incident responder's role?
- A. View option is selected and all display attributes are deselected.
- B. Server administration rights are deselected.
- C. Incident Access tab conditions are specified.
- D. Available Smart Response rules are deselected.
Answer: A
NEW QUESTION # 92
Which two protocols are available by default and recognized by Network Monitor based on their individual signatures? (Select two.)
- A. IM: Google Talk
- B. SNMP
- C. IM: AIM
- D. HTTPS
- E. FTP
Answer: C,E
NEW QUESTION # 93
A DLP administrator is testing Web Prevent functionality. When the administrator posts a small test file to a cloud storage website, a new incident fails to appear. What should the administrator do to allow incidents to be generated against this file?
- A. uncheck trial mode under the ICAP tab
- B. add the filename to the Inspect Content Type field
- C. change the 'Ignore Requests Smaller Than' value to 1
- D. change the PacketCapture.DISCARD_HTTP_GET value to 'false'
Answer: C
NEW QUESTION # 94
You are working on a Storage Foundation 5.0 server named Srv1 that has a disk group named vol1. You install another Storage Foundation 5.0 server named Srv2. You want to successfully move the disk group from Srv1 to Srv2. To initiate the movement, you stop all volumes in the disk group, and deport and move all disks to Srv2. What should you do next?
- A. Recognize the disks using VxVM.
- B. Format the disk group.
- C. Start the volumes in the disk group.
- D. Create a new disk group.
Answer: A
NEW QUESTION # 95
While accessing a node in the Dynamic Multipathing (DMP) database you get an error "VxVM vxdmp NOTICE V-5-0-111 disabled dmpnode dmpnode_device_number".
How will you resolve this error? (Each correct answer presents part of the solution. Select two.)
- A. If possible correct the hardware failures Then, recover the volume using the vxrecover command.
- B. Replace the hardware because there may be a problem with host-bus adapter.
- C. Enable the appropriate controllers to allow at least one path under this DMP node.
- D. Check the underlying hardware to recover the desired path.
Answer: C,D
NEW QUESTION # 96
You are administering the Storage Foundation 5.0 environment in your organization. There is one particular file system that continually shows a high level of fragmentation. What should you do to prevent fragmentation?
- A. Use the df command regularly to monitor free space.
- B. Schedule regular defragmentation runs using the cron command.
- C. Set the initial_extent_size tunable VxFS I/O parameter.
- D. Allocate the space available in the file system that best fits the data.
Answer: B
NEW QUESTION # 97
Consider a situation where you run the vxdmpadm start restore command and encounter an error message "VxVM vxdmpadm ERROR V-5-1-3243 The VxVM restore daemon is already running" How will you solve this error?
- A. Stop vxdmpadm and restart vxdmpadm.
- B. Restart the all the VxVM daemons.
- C. Stop vxdmpadm and reboot the system.
- D. Stop vxdmpadm and start vxdarestore.
Answer: A
NEW QUESTION # 98
Which two products are leveraged for Network Prevent integration? (Select two.)
- A. Span Port
- B. Proxy Server
- C. Load Balancer
- D. Network Tap
- E. Mail Transfer Agent
Answer: B,E
NEW QUESTION # 99
An incident responder is viewing a discover incident snapshot and needs to determine which information to provide to the next level responder. Which information would be most useful in assisting the next level responder with data clean-up?
- A. Incident Details: Message Body content
- B. Custom Attributes: Most Active User from Data Insight
- C. Incident Details: File Owner metadata
- D. Access Information: File Permissions
Answer: B
NEW QUESTION # 100
Refer to the exhibit.
Symantec Data Loss Prevention's four phases of risk reduction model provides a blueprint for identifying and remediating key risk areas without disrupting legitimate business activity. What occurs during the notification phase?
- A. On-Screen Pop-ups compare existing company information protection polices to best practices.
- B. Notification helps define confidential information and assign appropriate levels of protection to it using classifications.
- C. Notification helps develop a plan for integrating appropriate data security practices.
- D. Automated sender notification educates employees in real-time about company policy violations.
Answer: D
NEW QUESTION # 101
A DLP administrator is attempting to use Encryption Insight to detect confidential information in encrypted files but has been unsuccessful. It is determined that the process was unable to retrieve the appropriate PGP key because the user key was using the incorrect encryption mode. What is the correct encryption mode that must be used by the user key?
- A. Client Key Mode
- B. Server Key Mode
- C. Guarded Key Mode
- D. Client Server Key Mode
Answer: B
NEW QUESTION # 102
You are writing the change documents for a procedure to relay a volume. In which two cases is it necessary to specify a target plex for the "vxassist relayout" operation? (Each correct answer presents part of the solution. Select two.)
- A. When a volume with multiple mirrors is being relaid with only two plexes.
- B. When a mirrored volume is being converted to RAID-5.
- C. When a concatenated layout is being relaid to a mirror-stripe layout.
- D. When the volume affected has plexes of differing layouts.
- E. When a RAID-5 volume is being relaid as a mirrored volume.
Answer: B,D
NEW QUESTION # 103
You have a system that has two disks-disk01 and disk02, which are mapped into the system configuration during boot as disks c0t0d0s2 and c0t1d0s2, respectively. A failure has caused disk01 to become detached. What would you do to view the status of the failed disk01?
- A. Use the vxprint command
- B. Use the vxdg -s list command
- C. Use the vxdisk list command
- D. Use the vxdg list command
Answer: C
NEW QUESTION # 104
......
250-587 Practice Test Pdf Exam Material: https://www.realvce.com/250-587_free-dumps.html
250-587 Answers 250-587 Free Demo Are Based On The Real Exam: https://drive.google.com/open?id=1mVgq9oDUQqzyiL4yxienvpY5DfiopQ-F