Share Latest Jun-2024 OMG-OCSMP-MBI300Test Practice Test Questions, Exam Dumps
Positive Aspects of Valid Dumps OMG-OCSMP-MBI300 Exam Dumps!
NEW QUESTION # 17
Choose the correct answer.
In the following bdd, A delegates both of its ports to B:
Which ibd correctly represents this?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 18
Choose the correct answer.
Given the following diagram:
Which SysML, relationship should be used to relate c1 to Weight_Requirement for best semantics?
- A. Copy
- B. Refine
- C. Dependency
- D. composition
- E. Trace
- F. Satisfy
- G. Association
Answer: E
NEW QUESTION # 19
Choose the correct answer
In a state machine which behavior can be interrupted by a transition which leaves the current state?
- A. an exit behavior
- B. a do behavior
- C. an entry behavior
- D. the effect of an internal transition
Answer: B
NEW QUESTION # 20
Choose the correct answer.
The area of a rectangle is calculated through analysis of its height and width:
How is this represented in a model?
A)
B)
C)
D)
E)
- A. Option B
- B. Option A
- C. Option C
- D. Option D
Answer: B
NEW QUESTION # 21
Choose the correct answer
What is the significance of the verify relationship?
- A. The verify relationship extends the refine relationship to specify how the requirement will be verified.
- B. The verify relationship is an extension of the satisfies relationship, relating a block to a verification activity.
- C. The verify relationship is restricted to relating a requirement to a testCase only.
- D. The verify relationship is used to prove. That the assertion of the satisfy relationship is true Thus, a verify relationship is meaningless without a corresponding satisfy relationship.
- E. The verify relationship relates a requirement to some other model element such as a testCase. activity, or interaction that can prove the requirement has been satisfied.
Answer: A
NEW QUESTION # 22
Choose the correct answer
What is the statement "An activity specifies the behavior of a use case?
- A. a guideline from a methodology
- B. a constraint of the activity element
- C. a constraint defined in SysML
- D. a constraint of the use case element
Answer: C
NEW QUESTION # 23
Choose the correct answer.
Given the following diagram:
Which message ordering is valid?
- A. M3, M4. M1, M2
- B. None of these orderings is valid.
- C. M3. M1. M2, M4
- D. M1, M2. M3, M4
Answer: A
NEW QUESTION # 24
Choose the correct answer
A system consists of two identical tanks each containing a different level of fluid. The tanks are connected together by a port at the bottom of each tank. This system is modeled m the following diagram:
Which statement is true?
- A. The value property /rate : flow rate is a derived property, which accommodates calculating its value based on oilier properties
- B. The block Fluid, which types item property flow 1 ->2. has a value property press : Pressure with a default value of null
- C. Parts t1 and t2 each use part instances to redefine the value of property level : Height
- D. Both port p1 on pan t1. and port p1 on t2. must have values defined for value properties /rate and press
- E. The value of /rate for item property flow 1->2 is positive for flow from t1 to t2. and negative for How in the other direction
Answer: A
NEW QUESTION # 25
Choose the correct answer
Given the following bdd for a token ring network, in which a token flows from node n to node n+1 except that when it reaches the node at the maximum position n flows to the node at the minimum position.
Which ibd correctly models this behavior?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 26
Choose the correct answer
How is a testCase used to validate a requirement?
- A. Validation of a requirement can be indicated using a satisfiedBy relationship to a testCase
- B. A requirement can have a vehfiedBy relationship to a testCase even if the test has not yet been conducted or even fully specified
- C. Only the verdict model element (which can be a property of a testCase) can have a verifies relationship to a requirement.
- D. testCase is part of the UML Testing Profile and cannot be used with SysML.
- E. The testCase model element can be used in SystvIL but it only applies to software
Answer: A
NEW QUESTION # 27
Choose the correct answer
What does a «rate» applied to an activity edge specify?
- A. the expected number of changes to an object's value per time interval.
- B. the expected number of objects that traverse the edge per time interval
- C. an upper bound on the number of changes to an object's value per time interval
- D. a lower bound on the number of changes to an object's value per time Interval
- E. a lower bound on the number of objects that will traverse the edge per time interval
- F. an upper bound on the number of objects that will traverse the edge per time interval
Answer: B
NEW QUESTION # 28
Choose the correct answer
Which diagram fragment validly depicts adding properties to a stereotype?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: D
NEW QUESTION # 29
Choose the correct answer
Which statement is true when modeling generalization?
- A. Subclasses may remove or redefine existing features, but not add features, to a superclass.
- B. Subclasses may add and remove, but not redefine, existing features of a superclass
- C. Subclasses may add, remove, and redefine existing features of a superclass
- D. Subclasses may only redefine existing features of a superclass.
- E. Subclasses may add and redefine, but not remove existing features of a superclass
Answer: E
NEW QUESTION # 30
Choose the correct answer.
What is one key advantage of using SysML parametrics versus traditional derived properties?
- A. it takes many more steps to specify derived properties in the typical tool compared to specifying constraint blocks.
- B. OCL-based constraint expressions can be used with SysML parametrics but not with derived properties
- C. SysML parametrics supports non causal expressions, whereas a derived property involves an expression with a fixed output direction
- D. A derived property requires an additional constraint expression, whereas SysML parametrics does not.
Answer: A
NEW QUESTION # 31
Choose the correct answer.
Which stereotype depicts that an object node will replace existing tokens with newly arriving tokens when the specified upper limit is reached?
- A. <replace>
- B. <overwrite>
- C. <notbuffer>
- D. No stereotype is needed in this case since it describes the default condition
Answer: B
NEW QUESTION # 32
Choose the correct answer.
The essentials of a laptop battery capacity model are shown In the following diagrams (where the value types W, h and Wh stand for watl, hour, and watt-hour respectively). Assume that the instance values shown are inputs, and that nothing relevant has been omitted.
The designer needs to determine what the energy_capacity of battery 1 should be to enable a laptop usage_time_capacity time of 8 hours. Which combination of the options listed in the text box in the figure will achieve this Intent with minimal changes (including minimal new aspects)?
- A. O1.1 and O2 2
- B. O1.2 and O2.1
- C. O1.2 and O2.3
- D. O1 1 and O2 3
- E. O1 7 and O2.2
- F. O1 3 and O2 3
- G. O1.1 and O2 1
Answer: D
NEW QUESTION # 33
Choose the correct answer
What does a <rate> applied to an activity edge specify?
- A. the expected number of changes to an object's value per time interval.
- B. the expected number of objects that traverse the edge per time interval
- C. an upper bound on the number of changes to an object's value per time interval
- D. a lower bound on the number of changes to an object's value per time Interval
- E. a lower bound on the number of objects that will traverse the edge per time interval
- F. an upper bound on the number of objects that will traverse the edge per time interval
Answer: B
NEW QUESTION # 34
Choose the correct answer.
Block 1 has a value property 'a' part 1. typed by Block! sends the message Ml If a»0; otherwise it sends message M2.
Which diagram depicts this scenario?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 35
Choose the correct answer.
Given the model composed of the following diagram:
The modeler has set all shown values us inputs and next intends to solve the mode that is, to calculate the outputs. Assume nothing relevant has been left out.
What is wrong with this model?
- A. The slash (/) in property a1 of BlockA is an error that paramethes will assume to be a division sign.
- B. Both easel and case2 should not be underlined.
- C. Block A cannot be used by both easel and case2.
- D. The modeler set a1 as an input value in case1.
Answer: B
NEW QUESTION # 36
Choose the correct answer
Different Block kinds are modeled using stereotypes such as «system», «subsystem» or «software» Where are these stereotypes typically defined?
- A. Each modeler who writes requirements can define stereotypes
- B. A profile that maps modeling methodology concepts to the model defines the stereotypes
- C. The stereotypes are part of the SysML standard
- D. The modeling tool provides the stereotypes
Answer: D
NEW QUESTION # 37 
Assume the block is in A-State when two evCs ate received.
What is a plausible sequence of behaviors that occurs when a subsequent evG occurs?
- A. stop activity X (if ninning). action 2, action 8, action 5, start activity Y, action 7, action 7, action 6
- B. stop activity X (if running), action 8, action 5, start activity Y, action 7
- C. stop activity X (if running), action 2, action 8, action 5, start activity Y, action 7, action 7
- D. stop activity X (if running) action 8, action 5, start activity Y, action 7, action 7
- E. action 1. stop activity X (if running), action 7, action 8, action 5, start activity Y
Answer: E
NEW QUESTION # 38
Choose the correct answer.
A system engineer has created the following model of a tank system composed of two tanks and a pipe connecting them:
The system engineer wants to mathematically relate the flow of water through the pipe using the following mass conservation equation: Tank_System wFlowin flowRate * Tank_System pipe endA_Area = Tank_System wFlowOut flowRate * Tank_System pipe endB_Area How would the system engineer model this in SysML?
- A. Create a block to represent the mass conservation equation, use it in Tank_System. and relate its properties to the properties of wFlowin. wFlowOut. and pipe
- B. Create a constraint block to represent the mass conservation equation, use it in Tank_System. and relate its parameters to the properties of wFiowin. wFlowOut. and pipe
- C. Create a constraint block to represent each of wFlowin wFlowOut and the mass conservation equation; use these constraint blocks In Tank_System. and relate their parameters to the properties of pipe.
- D. Create two flow properties for Tank_System (equivalent to wFlowin and wFlowOut); create a constraint block for the mass conservation equation and use it in Tank_System. and then relate the flow properties to the new constraint property.
- E. It is not possible to model this because wFlowin and wFlowOut are item properties and not flow properties
Answer: C
NEW QUESTION # 39
Choose the correct answer.
Given the following diagram:
How does state machine Example behave after receipt of event M1 with x equal to zero?
- A. it arbitrarily enters either State 2 or State 3.
- B. It remains in State 1.
- C. It terminates
- D. Its behavior is not defined.
Answer: B
NEW QUESTION # 40
......
Practice LATEST OMG-OCSMP-MBI300 Exam Updated 92 Questions: https://www.realvce.com/OMG-OCSMP-MBI300_free-dumps.html
First Attempt Guaranteed Success in OMG-OCSMP-MBI300 Exam: https://drive.google.com/open?id=1eykYBJRMeYG060dgoGbXhHnBdK5rkDcR