Pass Cisco 300-425 Exam Info and Free Practice Test
New 2026 Latest Questions 300-425 Dumps - Use Updated Cisco Exam
Cisco 300-425 certification exam is designed for professionals who want to validate their expertise in designing enterprise wireless networks using Cisco technologies. 300-425 exam is a part of the Cisco Certified Specialist – Enterprise Wireless Design certification track and is one of the essential exams required to achieve this certification. Designing Cisco Enterprise Wireless Networks certification is aimed at network engineers, system engineers, and wireless network designers who want to enhance their skills in designing and deploying enterprise wireless networks.
Cisco 300-425 certification exam is a valuable credential for individuals who are interested in pursuing a career in wireless networking. 300-425 exam covers a wide range of topics related to wireless LAN design, deployment, and security, and is designed to test the candidate's knowledge and skills in applying these concepts to real-world scenarios. Passing 300-425 exam can lead to greater job opportunities and higher salaries, making it a worthwhile investment for anyone looking to advance their career in the wireless networking industry.
NEW QUESTION # 193
An engineer is reducing the subnet size of the corporate WLAN by segmenting the VLAN into smaller subnets. Clients will be assigned a subnet by location. Which type of groups can the engineer use to map the smaller subnets to the corporate WLAN?
- A. RF groups
- B. WLC port groups
- C. AP groups
- D. interface groups
Answer: C
Explanation:
NEW QUESTION # 194
Which Cisco IOS VPN technology leverages Ipsec, mGRE, dynamic routing protocol, NHRP, and Cisco Express Forwarding?
- A. FlexVPN
- B. GETVPN
- C. DMVPN
- D. Cisco Easy VPN
Answer: C
Explanation:
Dynamic Multipoint Virtual Private Network (DMVPN) is a dynamic tunneling form of a virtual private network (VPN) supported on Cisco IOS-based routers and Unix-like Operating Systems based on the standard protocols, GRE, NHRP and Ipsec. This DMVPN provides the capability for creating a dynamic-mesh VPN network without having to pre-configure (static) all possible tunnel end-point peers, including Ipsec (Internet Protocol Security) and ISAKMP (Internet Security Association and Key Management Protocol) peers. DMVPN is initially configured to build out a hub-and-spoke network by statically configuring the hubs (VPN headends) on the spokes, no change in the configuration on the hub is required to accept new spokes. Using this initial hub-and-spoke network, tunnels between spokes can be dynamically built on demand (dynamic-mesh) without additional configuration on the hubs or spokes. This dynamic-mesh capability alleviates the need for any load on the hub to route data between the spoke networks.
DMVPN is combination of the following technologies:
Multipoint GRE (mGRE)
Next-Hop Resolution Protocol (NHRP)
Dynamic Routing Protocol (EIGRP, RIP, OSPF, BGP)
Dynamic Ipsec encryption
Cisco Express Forwarding (CEF)
Reference: http://en.wikipedia.org/wiki/Dynamic_Multipoint_Virtual_Private_Network
NEW QUESTION # 195
A company wants to replace its existing PBX system with a new VoIP System that will include wireless IP phones. The CIO has concerns about whether the company's existing wireless network can support the new system. Which tool in Cisco Prime can help ensure that the current network will support the new phone system?
- A. Map Editor
- B. Site Calibration
- C. Voice Readiness
- D. Location Readiness
Answer: C
Explanation:
The Voice Readiness tool within Cisco Prime Infrastructure is designed to assess the wireless network's ability to support voice services, including VoIP. It evaluates various factors such as signal strength, noise levels, and coverage to ensure that the wireless network can handle the quality of service requirements needed for voice communications.
NEW QUESTION # 196
An engineer is deploying new APs to serve IEEE 802.11g through 802 11ac clients and wants to use the Ekahau Site Survey tool to verify RF coverage Management wants the engineer to verity and create coverage maps as quickly as possible. Which configuration accomplishes the goal?
- A. active mode with two wireless adapters
- B. passive mode with one wireless adapter
- C. passive mode with two wireless adapters
- D. active mode with one wireless adapter
Answer: C
NEW QUESTION # 197
An engineer must create a multicampus architecture wireless design to accommodate 4500 access points for wireless data Which model controller the requirements to support all access points on one high availability controller setup?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 198
An enterprise network administrator is asked to set up an experimental WLAN for a collaboration project with a local service provider. The WLAN must be anchored to a WLC in the service provider data center using legacy mobility mode. After the configurations are completed on the WLCs and the firewalls in the path, the data path mobility tunnel is failing to come up. What should be performed by the administrator to debug the issue?
- A. Use the eping command on the WLC.
- B. Establish a Telnet connection from a local PC to the firewall on port 16666.
- C. Use the mping command on the WLC.
- D. Establish a Telnet connection from a local PC to the firewall on port 97.
Answer: A
Explanation:
They send mpings, which test mobility control packet reachability over the management interface over mobility UDP port 16666 and they send epings, which test the mobility data traffic over the management interface over EoIP port 97. The Control Path text box shows whether mpings have passed (up) or failed (down), and the Data Path text box shows whether epings have passed (up) or failed (down).
NEW QUESTION # 199
What is the primary purpose of a validation survey?
- A. To predict AP placement before installation
- B. To simulate wireless performance using CAD drawings
- C. To test AP throughput in a lab environment
- D. To confirm that the deployed WLAN meets design requirements
Answer: D
NEW QUESTION # 200
A wireless deployment in a high-density environment is being used by vendors to process credit card payment transactions via handheld mobile scanners. The scanners are having problems roaming between access points in the environment. Which feature on the wireless controller should have been incorporated in the design?
- A. 802.11w
- B. Application Visibility Control
- C. AP Heartbeat Timeout
- D. RX SOP
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/configguide/b_cg85/advanced_wireless_tuning.ht
NEW QUESTION # 201
An engineer is planning a wireless deployment with two members in a mobility group. The engineer notices that there are issues establishing the mobility tunnel. The engineer must test the mobility EoIP data packet communication between two controllers. Which command runs this test?
- A. debug icmp
- B. eping Most Voted
- C. mping
- D. debug route
Answer: B
NEW QUESTION # 202
An engineer must decide the cell overlap for a wireless voice deployment. Which Cisco measurement recommendation should be considered?
- A. The measurement should be done on the 2.4-GHz band.
- B. The edge of the cell should be -67 dBm.
- C. The edge of the cell should be below 35 RSSI.
- D. One AP should be deployed per 3000 square feet.
Answer: B
Explanation:
NEW QUESTION # 203
An engineer designed a new wireless network for an enterprise customer. The customer is concerned that some wireless features may not be available because the bill of materials has only Base and no WPlus licenses for the Cisco WLC version 8. What is the reason for the engineer to take this approach regarding the licenses?
- A. To have all the features, plus licenses must be installed on the WLC.
- B. CAPWAP Data Encryption licenses are required for this feature.
- C. All WLC features are available because WPLUS license is now included in the Base license.
- D. ForceExtend AP needs a WPlus license.
Answer: C
Explanation:
In Cisco WLC version 8, the need for separate WPlus licenses has been eliminated as all features that were previously part of the WPlus license are now included in the Base license. This consolidation simplifies licensing management and ensures that customers have access to all necessary features without requiring additional licenses. References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide Premium Edition and Practice)
NEW QUESTION # 204
A customer is concerned about mesh backhaul link security. Which level of encryption does the backhaul link use?
- A. 3DES
- B. AES
- C. WEP
- D. hash
Answer: B
Explanation:
The mesh backhaul link uses Advanced Encryption Standard (AES) for encryption. AES is a robust encryption standard that is widely used in various security protocols, including WPA2 and WPA3, to provide a high level of security for wireless communications. It ensures that the data transmitted over the mesh backhaul link is protected against unauthorized access and eavesdropping.
Reference:
NEW QUESTION # 205
An engineer is designing a network deployment for a technology company. The company has four buildings with access points that must provide seamless wireless coverage and client roaming. The customer data center must have two WLCs and the core switches for the network. Which type of wireless architecture must be used?
- A. autonomous
- B. cloud
- C. distributed
- D. centralized
Answer: D
Explanation:
For a technology company with multiple buildings requiring seamless wireless coverage, client roaming, and centralized data center with two WLCs (Wireless LAN Controllers) along with core switches, a centralized wireless architecture is most suitable. This architecture allows for easier management of the network from a central location. References := CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide Premium Edition and Practice
NEW QUESTION # 206
An engineer must create data-link redundancy for the company's Cisco Wireless LAN Controller. The engineer has decided to configure LAG-based redundancy instead of port-based redundancy. Which three features of LAG-based redundancy influenced this decision? (Choose three.)
- A. The same port has multiple untagged dynamics interfaces.
- B. Full bandwidth of all links is available.
- C. All interface traffic passes as long as one port is up.
- D. Ports are grouped into multiple LAGs.
- E. Interface connection to two separate nonstacked switches is available.
- F. Packets are always sent out on the same port they are received on.
Answer: C,D,F
Explanation:
Explanation
https://community.cisco.com/t5/wireless-mobility-documents/lag-link-aggregation/ta-p/3128669
NEW QUESTION # 207
An engineer must speed up the reauthentication delays that are being experienced on the wireless infrastructure by deploying a key-caching mechanism. Which mechanism must be configured?
- A. FT
- B. GTK-randomization
- C. PEAP
- D. PMF
Answer: A
NEW QUESTION # 208
An engineer is designing a wireless network for a manufacturing facility that has high steel shelves. Which antenna type must be used?
- A. patch
- B. outdoor omnidirectional
- C. dipole
- D. indoor omnidirectional
Answer: A
NEW QUESTION # 209
An engineer must produce a passive survey report. The coverage heat map shows the entire site with all signal levels. To see only the desired coverage, which action must the engineer take?
- A. Use the RSSI slider to set the heat map to the desired cutoff lter.
- B. Filter the results to show the desired APs only.
- C. Change the color scheme to show the desired heat map.
- D. Use the RSSI calibration tool to configure the receiver sensitivity.
Answer: A
Explanation:
To focus the coverage heat map on the desired coverage, the engineer should use the RSSI slider to set the heat map to the desired cutoff filter. This action will adjust the display to show only the signal levels that meet or exceed the specified RSSI value, effectively filtering out weaker signals and highlighting areas with sufficient coverage. Reference: Designing Cisco Enterprise Wireless Networks (ENWLSD 300-425)
NEW QUESTION # 210
An engineer at a global enterprise organization must ensure that a mesh deployment has the highest number of channels available to the backhaul, regardless of region deployed, which design meets this requirement?
- A. redundant controllers in the most restrictive regulatory domain
- B. redundant controllers in the least restrictive regulatory domain
- C. one controller per country code
- D. one controller per continent
Answer: B
Explanation:
In a global mesh deployment, using redundant controllers in the least restrictive regulatory domain ensures the highest number of channels available for backhaul. This design accommodates the varying regulatory constraints of different regions by adhering to the domain with the most lenient channel availability.
NEW QUESTION # 211
A wireless engineer is utilizing the voice readiness tool in Cisco Prime for a customer that wants to deploy Cisco IP phones. Which dBm range is the network inspected against?
- A. -78 to -65 dBm
- B. -85 to -65 dBm
- C. -72 to -67 dBm
- D. -85 to -67 dBm
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/34/user/guide/bk_CiscoPrimeInfrastructur minimum is -90 and maximum is -67 for IP phone
NEW QUESTION # 212
An engineer is upgrading the legacy APs to 802.11ac Wave 2 capable APs. The existing gigabit uplinked switches provide 802.3at. Which switch limitation is a concern?
- A. output power
- B. collision domains
- C. high availability
- D. interface throughput
Answer: A
Explanation:
The concern with existing gigabit uplinked switches providing 802.3at is the output power limitation. 802.11 ac Wave 2 APs may require more power than what 802.3at can deliver, especially for features like Multi-User Multiple Input Multiple Output (MU-MIMO). References: CCNP Enterprise Wireless Design ENWLSD 300-
425 and Implementation ENWLSI 300-430 Official Cert Guide.
NEW QUESTION # 213
When conducting a site survey for real-time traffic over wireless, which two design capabilities of smartphones and tablets must be considered? (Choose two.)
- A. no support for 802.11ac
- B. fewer antennas than laptops
- C. no support for 802.11r
- D. higher data rates than laptops
- E. lower data rates than laptops
Answer: B,E
Explanation:
NEW QUESTION # 214
Users who leave the office with a wireless headset must be able to hand off the voice call with minimal disruption. The engineer drafted four possible floor plans for AP placement:
- red dots and arrows represent the direction of travel
- blue dots represent the AP placements
Which floor plan provides the requested functionality?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 215
The wireless survey report shows APs staggered throughout a facility, with several of them placed on the exterior walls. Other APs are located at building corners and major turns in the structure layout. Assuming that all survey locations are optimized with a minimum of -67 RSSI at cell edges with 20% overlapping cells, for which purpose is this survey model used?
- A. streaming video with VoIP, data, and HD resolution
- B. location services, VoIP, data, and video
- C. location-based services, BYOD preparation, and HD video streaming
- D. voice, data clients, and video on demand
Answer: B
Explanation:
The survey model described is used for location services, VoIP, data, and video. The placement of APs on exterior walls, building corners, and major turns helps ensure consistent coverage and signal strength for a variety of applications, including precise location tracking and high-quality voice and video communications. References: Designing Cisco Enterprise Wireless Networks (ENWLSD 300-425)
NEW QUESTION # 216
......
Cisco 300-425 certification exam tests the candidate's knowledge and skills in designing and implementing Cisco wireless networks. 300-425 exam covers critical wireless network concepts, such as design methodologies, site surveys, and RF planning. 300-425 exam also covers advanced topics such as high-density wireless networks, location-based services, and wireless security.
Latest 300-425 Exam Dumps Cisco Exam: https://www.realvce.com/300-425_free-dumps.html
Pass Cisco 300-425 PDF Dumps Recently Updated 351 Questions: https://drive.google.com/open?id=1lxtneHL1b44ECOWLx91n77JVWNRw0--q