[Oct-2021] Dumps Brief Outline Of The 010-151 Exam - RealVCE
010-151 Training & Certification Get Latest CCT Data Center
NEW QUESTION 14
During the auto-sync firmware upgrade process, what should be your initial input entered once the Fabric Interconnect boots up?
- A. auto-sync
- B. console
- C. upgrade firmware
- D. gui
Answer: B
NEW QUESTION 15
Which three troubleshooting procedures do you perform when there is no power to a Cisco UCS B250 M2 Blade Server? (Choose three.)
- A. Check the CPU sockets for bent pins.
- B. Check the back of the blade to ensure that there is no damage to the connection that goes into chassis.
- C. Decommission and acknowledge the blade.
- D. Move the blade to another slot in the chassis.
- E. Reseat the blade in the same slot in the chassis.
- F. Reseat the memory DIMMs.
Answer: B,D,E
NEW QUESTION 16
Which type of optics module is supported by a Cisco Nexus 7700 F4-Series 30-Port 100-Gigabit Ethernet Module?
- A. QSFP28
- B. Cisco CPAK
- C. QSFP+
- D. SFP+
Answer: C
NEW QUESTION 17
Refer to the exhibit.
Which three options are features of the Cisco UCS 6248UP Fabric Interconnect front panel? (Choose three.)
- A. FCoE port
- B. Console port
- C. Fan module
- D. 10 Gb/s port
- E. USB port
Answer: B,C,E
NEW QUESTION 18
Refer to the exhibit.
Which option should you select to get the output of the show tech-support detail command for the Cisco UCS B-Series blade?
- A. A - ucsm
- B. D - rack-server
- C. C - fabric-extender
- D. B - chassis
Answer: D
NEW QUESTION 19
Which two types of information does the show module NX-OS command display? (Choose two.)
- A. Module status
- B. Module type
- C. Module IP address
- D. Module ports type
- E. Module license information
Answer: A,B
Explanation:
Explanation/Reference: https://www.cisco.com/en/US/docs/switches/datacenter/sw/4_2/nx-os/system_management/ command/reference/sm_cmd_show.html
NEW QUESTION 20
After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.
Which four options should be verified? (Choose four.)
- A. Reseat the DIMMs, CPU, and PCI cards.
- B. Reseat the mezzanine card connector.
- C. Check for loose HDD cables.
- D. Verify that power supplies are receiving power.
- E. Verify the power source to the equipment.
- F. Check the CPU sockets for bent pins.
- G. Check the Cisco IMC for fan faults.
Answer: A,D,E,F
NEW QUESTION 21
Refer to the exhibit.
This image shows a CPU Pick-and-Place tool and a CPU Socket Protective Cap Removal tool. Which types of Cisco UCS servers and Intel Xeon processors do these tools support?
- A. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2600 Series processors
- B. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5- 2600 Series processors
- C. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5- 2400 Series processors
- D. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2400 Series processors
Answer: A
NEW QUESTION 22
Which three tools are necessary to console into a Cisco UCS C-Series Rack-Mount Server? (Choose three.)
- A. monitor
- B. USB serial adapter
- C. Cisco DB-9-to-RJ-45 console cable
- D. KVM dongle
- E. laptop
- F. keyboard
Answer: A,D,F
NEW QUESTION 23
Which tool is needed when servicing a UCS M5 server?
- A. PCIe slot cover
- B. T-30 Torx driver
- C. M5 DIMM puller
- D. HDD removal tool
Answer: B
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C220M5/install/C220M5/ C220M5_chapter_010.html
NEW QUESTION 24
Up to what speed can Category 5 UTP cable transmit data?
- A. 10 Mb/s
- B. 1000 Mb/s
- C. 100 Mb/s
- D. 10000 Mb/s
Answer: B
NEW QUESTION 25
Which group of UCS Virtual Interface Cards is exclusively designed for Cisco UCS C-Series Rack Server?
- A. VIC 1440, VIC 1340, VIC 1388, VIC 1280, M81KR VIC
- B. M81KR VIC, VIC 1497, VIC 1340, VIC 1387, VIC 1240
- C. VIC 1455, VIC 1497, VIC 1385, VIC 1387, VIC 1225
- D. VIC 1455, VIC 1480, VIC 1385, VIC 1340, VIC 1280
Answer: C
NEW QUESTION 26
Which group of UCS Virtual Interface Cards is exclusively designed for Cisco UCS C-Series Rack Server?
- A. VIC 1440, VIC 1340, VIC 1388, VIC 1280, M81KR VIC
- B. M81KR VIC, VIC 1497, VIC 1340, VIC 1387, VIC 1240
- C. VIC 1455, VIC 1497, VIC 1385, VIC 1387, VIC 1225
- D. VIC 1455, VIC 1480, VIC 1385, VIC 1340, VIC 1280
Answer: C
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/unified-computing-system- adapters/datasheet-c78-741130.html
NEW QUESTION 27
In the Cisco UCS S3260 Storage Server which two of the below ports are available on a System I/O Controller?
(Choose two.)
- A. Ethernet LOM port
- B. PCIe ports
- C. QSFP port
- D. KVM Console port
- E. Dedicated Management port
Answer: B,C
Explanation:
Explanation
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-s-series- storage-servers/s3260-specsheet.pdf page 3
NEW QUESTION 28
Refer to the exhibit.
Which item does B represent?
- A. Rear 2.5-inch drive bays
- B. PCle Riser 2
- C. PCle Riser 1
- D. Power Supply
- E. mLOM
Answer: B
NEW QUESTION 29
Which five things should the administrator verify after performing maintenance or replacing a blade server?
(Choose five.)
- A. fan and power status
- B. blade server status
- C. mezzanine card status
- D. memory DIMM status
- E. CPU status
- F. host OS boot status
- G. hard drive status
Answer: B,C,D,E,G
NEW QUESTION 30
......
Certification Training for 010-151 Exam Dumps Test Engine: https://www.realvce.com/010-151_free-dumps.html
CCT Data Center 010-151 Real Exam Questions and Answers FREE Updated: https://drive.google.com/open?id=15KkYqd-Eg1HzywpVEC0J7_Bnoa1Lzbh3