[Oct-2021] Cisco Channel Partner Data Center 500-920 Exam Practice Dumps
2021 500-920 Premium Files Test pdf - Free Dumps Collection
NEW QUESTION 24
Which two interfaces allow access to Cisco UCS Manager? (Choose two )
- A. Cisco IMC
- B. Cisco UCS Manager GUI
- C. Cisco UCS Manager XML API
- D. Cisco KVM
Answer: B,C
NEW QUESTION 25
What is the result of enabling the Core File Exporter in UCS Manager?
- A. A core dump file will be immediately created and transmitted using HTTP protocol
- B. A core dump must be remotely activated by Cisco TAC.
- C. A core dump will immediately be generated and will be exported
- D. If a subsequent triggering event occurs, a core dump will be generated and sent by TFTP
Answer: C
NEW QUESTION 26
When troubleshooting a LAN connectivity issue, you notice a failed uplink from the Cisco UCS Fabric Interconnects to the upstream LAN switch. What two could be causing the issue? (Choose two )
- A. Misconfigured QoS parameters on the failed uplink
- B. A port channel mismatch between the Fabric Interconnects and the upstream LAN switch
- C. A SFP Type mismatch between the Fabric Interconnects and the upstream LAN switch
- D. A port speed configuration mismatch between the Fabric Interconnects and the upstream LAN switch
- E. Misconfigured VLAN on the failed uplink
Answer: A,B
NEW QUESTION 27
In order to create an Inband Profile for Cisco Integrated Management Controller (IMC) connectivity, what do you need to perform first?
- A. Create an IPMI Policy
- B. Create a Management IP Pool, a MAC Address Pool, and a VLAN Pool
- C. Create a Management IP Pool, a VLAN. and a VLAN Group
- D. Create a Service Profile
- E. Create different VLANs, with different VLAN IDs
Answer: D
NEW QUESTION 28
When troubleshooting, which option is the primary uses of the SCOPE command?
- A. To access the log files that reside in a component
- B. To access the log files on the virtual machines
- C. To access the log files on the log server
- D. The SCOPE command is not helpful in this case
Answer: A
NEW QUESTION 29
When booting up a Cisco UCS Server you want to see boot time diagnostic messages of the POST, what action is required for you to do so?
- A. Enable Quiet Boot on the Server's BIOS
- B. Disable Fast Boot on the Server's Service Profile
- C. Disable Fast Boot on the Server's BIOS
- D. Restart the Server
- E. Enable Quiet Boot on the Server's Service Profile
Answer: E
NEW QUESTION 30
Which statement best describes managing Cisco UCS servers using NX-OS CLI on the Fabric Interconnects?
- A. The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the servers and Fabric Interconnects
- B. The NX-OS CLI on the Fabric Interconnects allows you to manage QoS parameters on the Fabric Interconnects and an upstream LAN switch
- C. The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.
- D. The NX-OS CLI on the Fabric Interconnects allows you to view, but not change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.
Answer: C
NEW QUESTION 31
After installing a new UCS M4 server, which two Cisco Integrated Management Controller connectivity options do you have? (Choose two )
- A. XML API Access
- B. Web Access
- C. In-band Access
- D. Out-of-Band Access
- E. SNMP
Answer: A,C
NEW QUESTION 32
In a Cisco UCS Manager, if all KVM sessions to each server fail to start, what is likely causing the problem?
- A. The workstation you are using to connect to the KVM session is the problem
- B. The Fabric Interconnect to which you are connected has a problem
- C. Cisco UCS Manager has a problem
- D. The I/O Modules in the chassis are the problem
Answer: A
NEW QUESTION 33
When server is booting from SAN, which command verifies the PLOGI sessions with the target?
- A. FCMap
- B. Lunmap
- C. Lunlist
- D. FCIist
Answer: C
NEW QUESTION 34
A new UCS dual fabric cluster is being configured with a single chassis. The administrator notices that the cluster is not in High Availability (HA) mode. What is the possible cause?
- A. The HA plugin has not been installed in UCS Manager
- B. The UCS-FI-HA license has not been activated in UCS Manager
- C. The links to the chassis are not enabled
- D. No uplinks are active into the data center.
Answer: A
NEW QUESTION 35
Which ethernet port type is used when configuring UCS Fabric Interconnect connections to Cisco UCS C-series servers?
- A. Direct Connect Port
- B. Service Profile Port
- C. Server Port
- D. Uplink Port
Answer: D
NEW QUESTION 36
What occurs that causes a Split Brain Issue with Fabric Interconnects?
- A. A quorum tie occurs that must be resolved by the SEEPROM
- B. The subordinate Fabric Interconnect detects heartbeat failure and declares itself primary
- C. Manage configuration changes made with UCS Manager
- D. Both cluster links fail
Answer: B
NEW QUESTION 37
Which statement is true regarding the UCS Manager GUI is showing "Overall Status Unassociated" in the General tab for a C-series server?
- A. The server does not have a service profile assigned, but has been discovered by UCS Manager
- B. The server has a service profile assigned, but has connectivity issues with UCS Manager
- C. The server is not properly connected
- D. The server has been properly connected, but has not been discovered by UCS Manager
Answer: C
NEW QUESTION 38
In Cisco UCS, there are several interfaces involved on the packet path from the vNIC through the adapter, IOM to finally reach Pi Which is the order of those interfaces, starting from the vNIC?
- A. HIF. SIF, VIF, UIF NIF
- B. VIF, UIF, HIF, NIF SIF
- C. HIF. NIF, UIF, VIF SIF
- D. VIF, UIF, HIF, SIR NIF
Answer: D
NEW QUESTION 39
What are three possible causes of service profile association failure due to iSCSI configuration issue? (Choose three )
- A. Inappropriate network configuration
- B. Misconfigured iSCSI parameters
- C. iSCSI Target out of configured range of services
- D. Misconfigured LUN. LUN masking
- E. Wrong WWNN
- F. Improperly assigned iSCSI Class of Service
Answer: A,B,C
NEW QUESTION 40
......
Get ready to pass the 500-920 Exam right now using our Cisco Channel Partner Data Center Exam Package: https://www.realvce.com/500-920_free-dumps.html