[Mar 23, 2025] D-VXR-DY-01 Exam Dumps - 100% Marks In D-VXR-DY-01 Exam! [Q153-Q170]

Share

[Mar 23, 2025] D-VXR-DY-01 Exam Dumps - 100% Marks In D-VXR-DY-01 Exam!

Exam Dumps Use Real Dell Hyperconverged Infrastructure Dumps With 345 Questions!

NEW QUESTION # 153
An implementation engineer is deploying a new VxRail cluster.
What should they confirm before installing the hardware?

  • A. Service laptop is on the same IP network as the iDRACs
  • B. At least 24 in (61 cm) of clearance must exist in front of and behind the cabinet
  • C. Redundant power zones exist with adequate power cables
  • D. Power distribution supports only the power rating of a single node

Answer: B


NEW QUESTION # 154
What is the purpose of the As-Built Configuration Generator?

  • A. Capture and generate the installation workflow for review in the event of a failed deployment
  • B. Create the customer deliverable documentation of the Dell EMC product/solution implementation
  • C. Keep a record of all spare nodes, not yet added to a VxRail Cluster
  • D. Provide advanced control grouping for Stretched Clusters

Answer: B


NEW QUESTION # 155
What is a consideration when implementing a custom VDS on a VxRail cluster?

  • A. Used by multiple clusters managed by a single vCenter instance
  • B. Supports only four NIC uplinks
  • C. Supports only two NIC uplinks
  • D. Supported with external and internal vCenter Servers

Answer: D


NEW QUESTION # 156
Match each IDRAC Maintenance page tab to its description.

Answer:

Explanation:


NEW QUESTION # 157
Which log files are related to a VxRail upgrade?

  • A. loudmouth.log and marvin.log
  • B. platform_svc.log and localhost_access_log.txt
  • C. lcm-web.log, lcm-migration.log, and lcm-do.log
  • D. dayone.log, short.term.log, and long.term.log

Answer: C


NEW QUESTION # 158
Which is the initial default HA setting for resource capacity reserved for a VxRail cluster?

  • A. 50%
  • B. 25%
  • C. 15%
  • D. 35%

Answer: A


NEW QUESTION # 159
After the installation of a VxRail cluster, the vSAN Health Check shows a hardware compatibility warning.
Where can detailed information about this health check and its resolution be found?

  • A. VxRail Manager Help
  • B. vCenter Server Help
  • C. Dell EMC Knowledge Base
  • D. VMware Knowledge Base

Answer: D


NEW QUESTION # 160
A VxRail 7.0.100 environment is managed by the internal vCenter Server. The customer asks the implementation engineer to deploy a new VxRail cluster using the existing vCenter Server.
What should the response of the engineer?

  • A. Supported by neither the internal vCenter Server nor external vCenter Server
  • B. Only supported on VxRail software 4.7.xxx
  • C. Not supported on VxRail software 7.0.100
  • D. Not supported for internal vCenter Server

Answer: C


NEW QUESTION # 161
A VxRail cluster 4.7.xxx environment is managed by the internal vCenter Server. An implementation engineer plans to deploy a new VxRail cluster using the existing vCenter Server instance, then use the customer-supplied VDS to manage both VxRail clusters.
What must be done?

  • A. Upgrade the internal vCenter Server to version 7.0
  • B. Migrate the internal vCenter Server to an external vCenter Server, then merge the PSC
  • C. Migrate the internal vCenter Server to an external vCenter Server, then upgrade the VxRail 4.7.xxx to 7.0.100
  • D. Upgrade the VxRail version from 4.7.xxx to 7.0.000

Answer: C


NEW QUESTION # 162
What is the correct CLI command to collect only the iDRAC logs for node HL2S8N2?

  • A. generateFullBundle.py --nodes HL2S8N2 -i
  • B. generateLogBundle.py --nodes HL2S8N2 -i
  • C. vc-support-bundle.sh --nodes HL2S8N2 -i
  • D. vm-support.sh --nodes HL2S8N2 -i

Answer: B


NEW QUESTION # 163
When populating the VxRail Installation wizard for an External vCenter solution, what is the correct format for hostnames?

  • A. vCenter and PSC should use FQDN; VxRail Manager should use host name only
  • B. VxRail Manager and vCenter should use FQDN; PSC should use host name only
  • C. vCenter, PSC, and VxRail Manager should use host name only
  • D. vCenter, PSC, and VxRail Manager should use FQDN

Answer: C


NEW QUESTION # 164
What is a supported witness configuration for a 3+3+1 VxRail Stretched Cluster?

  • A. Physical ESXi host with included cluster license
  • B. Physical ESXi host with multiple VxRail clusters as witness
  • C. vSAN Witness appliance or a physical ESXi host
  • D. vSAN Witness appliance with customer provided license

Answer: C


NEW QUESTION # 165
An implementation engineer has just completed the deployment of a new VxRail cluster. They are unable to connect to the vCenter Server.
What can they use to confirm the physical health of the VxRail nodes?

  • A. vSphere Client
  • B. VxRail Manager
  • C. SRS
  • D. iDRAC

Answer: D


NEW QUESTION # 166
A VxRail Manager VM must be configured as follows:
- IP address: 192 168.10.16
- Net mask: 255.255.255.0
- Gateway: 192 168 10 254
Which command must be used?

  • A. vxrail-network -config -vxrail-address 192.166 10 16 -vxrail-netmask 255 255.255 0 - vxrail-gateway 192.168.10.254
  • B. vxrail-network-config -ip 192 168 10.16-netmask 255.255.255.0-gateway 192 168 10.254
  • C. vxrail-primary -config -vxrail-address 192.168.10 16 -vxrail-netmask 255 255 255 0 - vxrail-gateway 192.168,10 254
  • D. vxrail-prrmary -config -ip 192 168 10 16 -netmask 255 255 255 0 -gateway 192 168 10 254

Answer: C


NEW QUESTION # 167
In addition to the VxRail YouTube video, links to what resources should the SE send to the customer, according to the VxRail PEQ Engagement Details worksheet?

  • A. VxRail QuickStart Guide Network Validation Tool
  • B. VxRail QuickStart Guide VxRail Network Guide
  • C. VxRail vCenter Server Planning Guide VxRail Network Guide
  • D. VxRail vCenter Server Planning Guide Network Validation Tool

Answer: A


NEW QUESTION # 168
You require a service tag for a VxRail service request. Where could you find this?

  • A. Cluster level physical view
  • B. Secure Remote Services device list
  • C. Appliance level physical view
  • D. VxRail Manager BIOS

Answer: C


NEW QUESTION # 169
Which mode must be enabled to support multiple VLANs on ToR ports?

  • A. Access
  • B. Port-Channel
  • C. Link Aggregation
  • D. Trunk

Answer: D


NEW QUESTION # 170
......

Pass Your D-VXR-DY-01 Exam Easily With 100% Exam Passing Guarantee: https://www.realvce.com/D-VXR-DY-01_free-dumps.html

D-VXR-DY-01 Dumps are Available for Instant Access: https://drive.google.com/open?id=1_ag9ZWqXaxsHGvg383RhhYr5Fg1ny06W