[Jan-2022] Microsoft MB-320 Official Cert Guide PDF
Exam MB-320: Microsoft Dynamics 365 Supply Chain Management, Manufacturing - RealVCE
The benefit of obtaining the Microsoft MB-320: Microsoft Dynamics 365 Supply Chain Management, Manufacturing Exam Certification
- It helps you to make your career into IT professionals and file systems, file and print sharing, local storage to get respect plus excellent jobs into the market.
- This certification credential will give you an edge over other counterparts. Apart from knowledge from Microsoft MB-320: Microsoft Dynamics 365 Supply Chain Management, Manufacturing exam.
- This certification will be judging your skills and knowledge on your understanding of Microsoft dynamics concepts & Understanding of how to operate on Microsoft dynamics.
Microsoft MB-320: Microsoft Dynamics 365 Supply Chain Management, Manufacturing Certification Path
The exam covers the ability to enhance professional correspondence, create calendars, and schedule appointments. Application examples include coordinating building resources, sending messages for marketing campaigns, planning staff meetings, and assigning meeting action items. Candidates are expected to demonstrate the correct application of the principal features of dynamics and complete tasks independently. If you are a certified professional and are excited to polish your abilities and advance your credentials to further advance your career, then you must take the certification exam for the Microsoft MB-320 exam. For example, Microsoft is considered the career-oriented provider in constant change that gives a boost to your profession. The Microsoft MB-320 exam topics on the list and are gaining popularity among the professionals and IT industries. But professionals are reluctant to not have enough time to devote to recommended books. But here is the good news for valuable and potential candidates, now certifications-questions offer you the best MB-320 practice exams, which helps you to pass and solve your Microsoft MB-320 certification exam in a week. certifications-questions offers you the best and most valid question and answer of exams and exam dump for preparing for the Microsoft MB-320 certification exam. To get a well-paying job, you should consider taking one of the famous certification exams. If you need to pass the certification exam on the first try and become a certified expert, you should think of finding the most reliable source that will help you pass multiple certification exams. RealVCE can assist you to improve your chances of passing any certification exam with the help of the MB-320 practice test. We have worked hard to create great preparation stuff for anyone who wants to take a certification exam to improve the possibilities of getting a well-paying job in the industry. To increase your possibilities, you should consider using the exam dumps provided by us.
NEW QUESTION 57
A company implements manufacturing in Dynamics 365 Supply Chain Management.
The company wants to efficiently produce products comprised of different order types.
You need to select the appropriate production plan.
Which production process should you use for the production run?
- A. lean
- B. discrete
- C. mixed mode
- D. process
Answer: C
Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/production-process-overview
NEW QUESTION 58
A company produces light projection toys for holiday decorations. The company plans to implement Lean manufacturing processes.
Production master data must meet the following requirements:
Visual templates for a holiday must only be included for in-store products where that holiday is celebrated Visual templates for a holiday must only be included for in-store products based upon that season Online customers must be able to order visual templates for any holiday or region.
You need to implement production master data.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 59
You work for a gem wholesaler that sells raw diamonds. Diamonds are purchased and sold in individual boxes but weighed and inventoried in carats.
You are setting up a catch weight item for diamonds. Each box of diamonds must be tracked by its individual container weight.
You need to set up this item as a full visibility catch weight item.
Which two steps must you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Create an inter-class unit of measure conversion between boxes and carats.
- B. Assign the item a Tracking dimension group with active serial number control.
- C. Assign it a Serial number group with per qty. defined as 1.
- D. Assign a Tracking dimension group with batch number as the only active tracking dimension.
Answer: A,B
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/create-a-catch-weight-item-with-full-visibility
NEW QUESTION 60
A manufacturing company uses discreet manufacturing to make skateboards. Production order picking lists are manually posted after finished goods are reported as finished.
A production order has six picking lists posted. The quantities on the picking lists do not match any of the reported or finished quantities. This causes an inventory error for the raw materials. All raw material transactions must be tracked on production order and reconciled.
You need to process a single picking list for each production order.
What should you do first?
- A. Delete the six posted picking list journals
- B. Create a counting journal to reconcile the inventory that was posted in error.
- C. Create a production picking list. When creating lines select option Full reversal.
- D. Create a movement journal and select the proper account for production postings to reconcile the inventory that was posted in error
Answer: C
NEW QUESTION 61
A company sells large batches of chemicals. Item specifications vary from batch to batch.
You must fulfill multiple orders from the same batch of chemicals. If a single batch cannot be reserved, manual reservation must be used. The system must also make reservations based on the earliest batch receipt date.
You need to set up a new chemical item that automatically uses the new batch reservation logic.
Which three settings should you configure? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. In the Item model group, select the FIFO inventory model.
- B. In the Tracking dimension group, select Coverage plan by dimension for batch number.
- C. In the Item model group, select FEFO date-controlled.
- D. In the Storage dimension group, select Coverage plan by dimension for the site and warehouse dimensions.
- E. In the Item model group, select Same batch reservation and Consolidate requirements.
Answer: A,C,E
NEW QUESTION 62
A customer produces light projection toys for holiday decorations throughout the year. Vendors have negotiated rebate agreements as a condition of their contract. The contract also contains the visual templates required for the customer to use in a season.
Vendor rebate agreements must only be applied if the following requirements are met:
* Units of measure for deliverables are the same unit of measure as on the agreement.
* The agreement is valid as of the date a purchase order is generated.
You need to configure the vendor rebate agreements.
What should you do?
- A. Set the Calculation date type field value to Requested delivery
- B. Set the Cumulative purchase by field value to the beginning of the season date
- C. Set the Cumulative purchase by field value to the end of the season date
- D. Set the Calculation date type field value to Created
Answer: D
Explanation:
Section: Create, process, and manage production batch orders
Explanation/Reference:
References:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/procurement/vendor-rebates
NEW QUESTION 63
A company uses Process manufacturing.
You need to review formulas and how the different ingredient types impact the batch balancing process.
Which ingredient types should you use? To answer, drag the appropriate ingredient types to the correct scenarios. Each ingredient may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/batch-balanci
NEW QUESTION 64
You are the product definition manager for a car manufacturing company. You set up and maintain the production configuration models used at the company.
You must build a new configuration model and include constraints in the model.
You need to determine which constraint type to use for each scenario.
Which constraint type should you use? To answer, drag the appropriate constraint types to the correct scenarios. Each constraint type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/build-product-configuration-model
NEW QUESTION 65
A manufacturer sends wiring harnesses to a vendor to be soldered to a connector. You have created the subcontracting process in the bill of materials (BOM) and route to account for the items sent to the vendor.
You create separate subcontracting purchase orders to account for the service. You attempt to add the service item to the BOM. The system generates an error.
You need to set up a new item model group for the service item.
Which three actions should you perform? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
* Create a new item model group and select stocked product option.
* Assign the item model group and select the stocked product option (here it is selected in option one so no need to select).
* Add the service item to the BOM
NEW QUESTION 66
A company produces homeopathic lotions for pain relief and uses Dynamics 365 for Finance and Operations.
Several components used in the production of the pain-relieving lotion and oils have special government-mandated reporting requirements.
You need to ensure the company can provide the appropriate reporting and tracking for these components.
Which parameters should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 67
A company produces homeopathic lotions for pain relief. The lotions use a combination of ProductA and ProductB. ProductA is the primary ingredient. You use ProductB to adjust the concentration of active ingredients in the lotion.
You need to ensure that the lotion final product has a consistent concentration of anti-inflammatory agents.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Set the formula line type of ProductA to Active.
- B. Set the formula line type of ProductB to Active.
- C. Set the formula line type of ProductC to None.
- D. Set the formula line type of ProductB to Compensating.
- E. Set the formula line type of ProductA to Compensating.
Answer: A,D
NEW QUESTION 68
A configure-to-order company is implementing Dynamics 365 for Finance and Operations. The company is preparing to use the product configuration model functionality to develop the Bill of materials (BOM), routes and valid configuration combinations.
You need to set up the configuration models, constraints, and pricing.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
NEW QUESTION 69
A company implements Dynamics 365 for Finance and Operations.
You run a master plan each week.
You need to resolve the issue in the scenario.
What should you do? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/job-scheduling
NEW QUESTION 70
A Discrete manufacturing company produces speakers. The high-end speaker model uses protective rubber strips on the edges.
Approximately five inches of rubber is consistently scrapped in the production process, regardless of production quantity. Workers manually consume the extra material on the picking list or scrap it in an inventory journal.
You need configure the system to automatically account for this scrap on the Bill of materials (BOM).
What should you do?
- A. Set a variable scrap of five percent for the rubber BOM line
- B. Add an additional BOM line for five inches and set consumption to Variable
- C. Set a Constant scrap of five on the BOM line for rubber
- D. Increase the required quantity of the rubber component by five on the BOM
Answer: C
Explanation:
Section: Create and manage production and lean orders
Explanation/Reference:
References:
https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/about-information-used-in-bom-calculations- with-standard-costs
NEW QUESTION 71
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company implements Dynamics 365 for Finance and Operations for their Lean manufacturing environment.
There has been an engineering change to a fixed quantity product that is in production. This change will add an additional processing step as the second step. The existing version must be phased out and replaced by the new version.
You need to ensure that the engineering change takes affect at the end of the month.
Solution:
1.) Edit the existing step number two activity to be the new engineering process
2.) Edit the existing production flow. Set the expiration date due to the end of the month
3.) Edit the existing Kanban rule. Set the expiration date to the end of the month
4.) Activate the production flow
Does the solution meet the goal?
- A. Yes
- B. No
Answer: B
Explanation:
Section: Create and manage production and lean orders
NEW QUESTION 72
A company implements Dynamic 365 for Finance and Operations. You run the latest master plan. You observe invalid results.
You need to set up tracing for the master plan.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION 73
Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A manufacturing plant uses batch tracking of raw materials, semi-finished goods, and finished goods.
It is difficult to determine when semi-finished and finished goods were produced and expired.
You need to incorporate automatic batch expiration dates for tracked items that are produced.
Solution:
1. Assign shelf life period in days to the items that require expiration dates.
2. Create a new batch number in the tracking dimensions for the items.
3. Enter the manufacturing date.
4. Save the record.
Does the solution meet the goal?
- A. Yes
- B. No
Answer: A
NEW QUESTION 74
A company uses Dynamics 365 Process manufacturing.
Employees work a half day so that they can attend a company event. You have a rush order that must be completed that same day.
After reviewing the net requirements of the batch order, only 400 of the total quantity of 1400 units must be completed today. The production manager must retain the original batch number as the quantity of 400. The original batch number must appear on documentation for the customer.
You need to split the batch order into two orders.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
* Select the batch order.
* Select split button.
* Enter 1000 in the split quantity field.
NEW QUESTION 75
A company uses Discreet manufacturing concepts to produce cables. The company's production scheduler uses internal documents to track issues on in-process production orders.
The production scheduler must group all in-process production orders according to issues. The scheduler must be able to easily determine issues with production orders.
You need to implement a method to easily identify production orders with issues.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION 76
A customer produces light projection toys for holiday decorations throughout the year. Vendors have negotiated rebate agreements as a condition of their contact. The contract also contains the visual templates required for the customer to use in a season.
Vendor rebate agreements must only be applied if the following requirements are met:
Units of measure for deliverables are the same unit of measure as on the agreement
The agreement is valid as of the date a purchase order is generated
You need to configure the vendor rebate agreements.
What should you do?
- A. Set the Rebate line break type field value to Quantity
- B. Set the Cumulative purchase by field value to the beginning of the season date
- C. Set the Rebate line break type field value to Amount
- D. Set the Unit of measure rebate option field value to Exact match
Answer: D
Explanation:
Explanation/Reference:
References:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/procurement/vendor- rebates
NEW QUESTION 77
A paint manufacturer is using Process manufacturing. The manufacturer has a quality error. Batches of paint that use the wrong formula have been marked for rework.
The production planner reports they cannot schedule the batch order even though the order has been estimated.
You need to add reservations to the items to be used for the rework order.
What should you do?
- A. Reset the batch order and delete the formula items. Re-enter the formula items
- B. Add by-products that need to be used and then re-estimate
- C. Reserve the inventory in the formula
- D. Add co-products that need to be used and then re-estimate
Answer: C
Explanation:
Section: Create, process, and manage production batch orders
NEW QUESTION 78
You need to create the constraint for the ML seat selection.
Which expression constraint should you use?
- A. [Trim==Legend|Seat==ML]
- B. Implies[Trim==Legend,Seat==ML]
- C. Seat!=ML
- D. Implies[Seat==ML,Trim==Legend]
Answer: D
NEW QUESTION 79
You are the production supervisor at a manufacturing company. You are in the process of configuring the production control module and its parameters.
A company plans to use manufacturing execution. Bill of materials (BOM) item consumption must be generated when items are reported at the operation level.
You need to configure the Manufacturing execution production order defaults form to allow for back flushing on operations.
How should you set up Automatic BOM consumption? To answer, drag the appropriate setting to the correct targets. Each source may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/production-pa
NEW QUESTION 80
......
Free MB-320 Exam Dumps to Improve Exam Score: https://www.realvce.com/MB-320_free-dumps.html
2022 Realistic MB-320 Dumps Exam Tips Test Pdf Exam Materials: https://drive.google.com/open?id=1OgyfMUAc9kBlQBwOpMq0mRoq1NHzh2vf