[Jan 04, 2025] Pass Cisco 200-201 Exam Info and Free Practice Test
200-201 Exam Dumps PDF Updated Dump from RealVCE Guaranteed Success
Cisco 200-201 certification exam is recognized globally and is highly respected within the cybersecurity industry. Individuals who pass 200-201 exam are considered to have a strong understanding of cybersecurity fundamentals and are well-prepared to take on entry-level cybersecurity roles.
NEW QUESTION # 77
DRAG DROP
Drag and drop the technology on the left onto the data type the technology provides on the right.
Select and Place:
Answer:
Explanation:
NEW QUESTION # 78
Which tool provides a full packet capture from network traffic?
- A. Wireshark
- B. Hydra
- C. CAINE
- D. Nagios
Answer: A
Explanation:
Wireshark is a widely-used network protocol analyzer that allows users to capture and interactively browse the traffic running on a computer network. It provides full packet capture capabilities, enabling detailed analysis of network traffic. Reference:: This is supported by the CBROPS course materials, which discuss security monitoring and the analysis of network traffic, including full packet capture tools like Wireshark
NEW QUESTION # 79
An organization's security team has detected network spikes coming from the internal network. An investigation has concluded that the spike in traffic was from intensive network scanning How should the analyst collect the traffic to isolate the suspicious host?
- A. based on the protocols used
- B. by most active source IP
- C. by most used ports
- D. based on the most used applications
Answer: B
Explanation:
To isolate the suspicious host that is performing intensive network scanning, the analyst should collect the traffic by most active source IP. This will help to identify the IP address of the host that is generating the most traffic and sending the most packets or bytes. The analyst can then apply filters or queries to analyze the traffic from that source IP and determine the nature and scope of the scanning activity. References := Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS) - Cisco, page 72; [Cisco CyberOps Associate CBROPS 200-201 Official Cert Guide], page 468
NEW QUESTION # 80
What is the difference between the rule-based detection when compared to behavioral detection?
- A. Behavioral systems find sequences that match a particular attack signature, while Rule-Based identifies potential attacks.
- B. Rule-Based systems have established patterns that do not change with new data, while behavioral changes.
- C. Rule-Based detection is searching for patterns linked to specific types of attacks, while behavioral is identifying per signature.
- D. Behavioral systems are predefined patterns from hundreds of users, while Rule-Based only flags potentially abnormal patterns using signatures.
Answer: B
Explanation:
Rule-based detection involves identifying malicious activities based on predefined rules or patterns of known attacks; it does not adapt or change with new data. In contrast, behavioral detection adapts over time by learning from new data; it identifies malicious activities based on deviations from established norms or behaviors. Reference: Cisco Certified CyberOps Associate Overview, Section 1.0: Security Concepts, Subsection 1.1: Compare and contrast the characteristics of data obtained from taps, NetFlow, and packet capture)
NEW QUESTION # 81
How does an attack surface differ from an attack vector?
- A. An attack surface identifies vulnerable parts for an attack, and an attack vector specifies which attacks are feasible to those parts.
- B. An attack vector matches components that can be exploited, and an attack surface classifies the potential path for exploitation
- C. An attack surface mitigates external vulnerabilities, and an attack vector identifies mitigation techniques and possible workarounds.
- D. An attack vector recognizes the potential outcomes of an attack, and the attack surface is choosing a method of an attack.
Answer: C
NEW QUESTION # 82
What is an attack surface as compared to a vulnerability?
- A. an exploitable weakness in a system or its design
- B. the sum of all paths for data into and out of the environment
- C. any potential danger to an asset
- D. the individuals who perform an attack
Answer: A
Explanation:
Explanation
An attack surface is the total sum of vulnerabilities that can be exploited to carry out a security attack. Attack surfaces can be physical or digital. The term attack surface is often confused with the term attack vector, but they are not the same thing. The surface is what is being attacked; the vector is the means by which an intruder gains access.
NEW QUESTION # 83
What is rule-based detection when compared to statistical detection?
- A. falsification of a user's identity
- B. likelihood of user's action
- C. proof of a user's identity
- D. proof of a user's action
Answer: D
Explanation:
Rule-based detection is a type of intrusion detection system (IDS) that uses predefined rules or signatures to identify malicious or suspicious activity. Rule-based detection can provide proof of a user's action, such as an attempt to exploit a known vulnerability or execute a malicious command. Rule-based detection can also provide a high level of accuracy and specificity, but it requires constant updates and maintenance of the rules or signatures. References:
https://learningnetworkstore.cisco.com/on-demand-e-learning/understanding-cisco-cybersecurity-operations-fund (Module 4: Attack Methods, Lesson 4.2: Attack Techniques)
NEW QUESTION # 84
A company encountered a breach on its web servers using IIS 7 5 Dunng the investigation, an engineer discovered that an attacker read and altered the data on a secure communication using TLS 1 2 and intercepted sensitive information by downgrading a connection to export-grade cryptography. The engineer must mitigate similar incidents in the future and ensure that clients and servers always negotiate with the most secure protocol versions and cryptographic parameters. Which action does the engineer recommend?
- A. Deploy an intrusion detection system
- B. Install the latest IIS version.
- C. Downgrade to TLS 1.1.
- D. Upgrade to TLS v1 3.
Answer: D
Explanation:
Upgrading to TLS v1.3 is recommended because it eliminates outdated cryptographic functions and reduces the risk of downgrade attacks, which can occur when attackers force connections to use weaker encryption. TLS v1.3 only supports secure cipher suites and algorithms, enhancing the security of communications.
NEW QUESTION # 85
An employee reports that someone has logged into their system and made unapproved changes, files are out of order, and several documents have been placed in the recycle bin. The security specialist reviewed the system logs, found nothing suspicious, and was not able to determine what occurred. The software is up to date; there are no alerts from antivirus and no failed login attempts. What is causing the lack of data visibility needed to detect the attack?
- A. The threat actor used a dictionary-based password attack to obtain credentials.
- B. The threat actor gained access to the system by known credentials.
- C. The threat actor used the teardrop technique to confuse and crash login services.
- D. The threat actor used an unknown vulnerability of the operating system that went undetected.
Answer: C
NEW QUESTION # 86
Refer to the exhibit.
Which type of log is displayed?
- A. IDS
- B. NetFlow
- C. proxy
- D. sys
Answer: B
NEW QUESTION # 87
What is personally identifiable information that must be safeguarded from unauthorized access?
- A. driver's license number
- B. zip code
- C. gender
- D. date of birth
Answer: A
Explanation:
Section: Security Policies and Procedures
NEW QUESTION # 88
An analyst is investigating a host in the network that appears to be communicating to a command and control server on the Internet. After collecting this packet capture, the analyst cannot determine the technique and payload used for the communication.
Which obfuscation technique is the attacker using?
- A. SHA-256 hashing
- B. TLS encryption
- C. ROT13 encryption
- D. Base64 encoding
Answer: B
Explanation:
ROT13 is considered weak encryption and is not used with TLS (HTTPS:443).
Source:https://en.wikipedia.org/wiki/ROT13
NEW QUESTION # 89
During which phase of the forensic process are tools and techniques used to extract information from the collected data?
- A. reporting
- B. investigation
- C. examination
- D. collection
Answer: C
NEW QUESTION # 90 
Refer to the exhibit. In which Linux log file is this output found?
- A. /var/log/dmesg
- B. /var/log/authorization.log
- C. var/log/var.log
- D. /var/log/auth.log
Answer: D
Explanation:
Section: Host-Based Analysis
NEW QUESTION # 91
Refer to the exhibit.
Which type of attack is being executed?
- A. SQL injection
- B. cross-site scripting
- C. command injection
- D. cross-site request forgery
Answer: A
NEW QUESTION # 92
What does an attacker use to determine which network ports are listening on a potential target device?
- A. man-in-the-middle
- B. SQL injection
- C. ping sweep
- D. port scanning
Answer: D
Explanation:
Section: Security Concepts
NEW QUESTION # 93
Which type of data must an engineer capture to analyze payload and header information?
- A. session logs
- B. alert data
- C. frame check sequence
- D. full packet
Answer: D
Explanation:
To analyze both payload and header information, an engineer must capture the full packet data. This includes all protocol and payload information for the traffic, allowing for a comprehensive analysis of the data being transmitted5678. Reference:: Full packet capture is a common practice in network monitoring and security, as it provides detailed insights into the data transmitted over the network, including both payload and header information
NEW QUESTION # 94
......
Cisco 200-201 exam is intended for individuals who are interested in building their careers in the cybersecurity field, including security analysts, network security engineers, and cybersecurity specialists. 200-201 exam also targets individuals who want to enhance their skills and knowledge in cybersecurity operations and gain recognition from employers and peers. 200-201 exam validates the candidates' ability to perform security monitoring, identify and analyze security threats, and understand security policies and procedures.
Pass Your Cisco Exam with 200-201 Exam Dumps: https://www.realvce.com/200-201_free-dumps.html
200-201 Exam Dumps - Cisco Practice Test Questions: https://drive.google.com/open?id=1hYtSXkCJ5nLeXHHS1ztf4p686_iC3vsT