Get ready to pass the 156-215.81 Exam right now using our Checkpoint Certified Security Administrator Exam Package
A fully updated 2024 156-215.81 Exam Dumps exam guide from training expert RealVCE
NEW QUESTION # 200
When logging in for the first time to a Security management Server through SmartConsole, a fingerprint is saved to the:
- A. Windows registry is available for future Security Management Server authentications.
- B. There is no memory used for saving a fingerprint anyway.
- C. Security Management Server's /home/.fgpt file and is available for future SmartConsole authentications.
- D. SmartConsole cache is available for future Security Management Server authentications.
Answer: D
NEW QUESTION # 201
After the initial installation the First Time Configuration Wizard should be run. Select the BEST answer.
- A. Connection to the internet is required before running the First Time Configuration wizard.
- B. First Time Configuration Wizard can be run from the command line or from the WebUI.
- C. First time Configuration Wizard can only be run from the WebUI.
- D. First Time Configuration Wizard can be run from the Unified SmartConsole.
Answer: B
Explanation:
Check Point Security Gateway and Check Point Security Management require running the First Time Configuration Wizard in order to be configured correctly. The First Time Configuration Wizard is available in Gaia Portal and also through CLI.
To invoke the First Time Configuration Wizard through CLI, run the config_system command from the Expert shell.
NEW QUESTION # 202
Your manager requires you to setup a VPN to a new business partner site. The administrator from the partner site gives you his VPN settings and you notice that he setup AES 128 for IKE phase 1 and AES 256 for IKE phase 2. Why is this a problematic setup?
- A. All is fine as the longest key length has been chosen for encrypting the data and a shorter key length for higher performance for setting up the tunnel.
- B. The two algorithms do not have the same key length and so don't work together. You will get the error ... No proposal chosen...
- C. Only 128 bit keys are used for phase 1 keys which are protecting phase 2, so the longer key length in phase 2 only costs performance and does not add security due to a shorter key in phase 1.
- D. All is fine and can be used as is.
Answer: C
NEW QUESTION # 203
Which of the following is NOT an identity source used for Identity Awareness?
- A. Remote Access
- B. AD Query
- C. UserCheck
- D. RADIUS
Answer: C
Explanation:
Explanation
UserCheck is not an identity source used for Identity Awareness. UserCheck is a feature that allows you to interact with users when they trigger Data Loss Prevention or Threat Prevention incidents2. Identity Awareness uses different methods to acquire identities, such as AD Query, Identity Agent, Browser-Based Authentication, Terminal Servers, Captive Portal, and RADIUS3 . Therefore, the correct answer is B: UserCheck.
NEW QUESTION # 204
Which of the following is a hash algorithm?
- A. IDEA
- B. 3DES
- C. DES
- D. MD5
Answer: D
NEW QUESTION # 205
What is true about the IPS-Blade?
- A. in R80, in the IPS Layer, the only three possible actions are Basic, Optimized and Strict
- B. in R80, the GeoPolicy Exceptions and the Threat Prevention Exceptions are the same
- C. in R80, IPS Exceptions cannot be attached to "all rules"
- D. in R80, IPS is managed by the Threat Prevention Policy
Answer: D
Explanation:
Explanation
In R80, IPS is managed by the Threat Prevention Policy567. The Threat Prevention Policy defines how to protect the network from malicious traffic using IPS, Anti-Bot, Anti-Virus, and Threat Emulation software blades5. The IPS layer in the Threat Prevention Policy allows configuring IPS protections and actions for different network segments5. The other options are not true about the IPS-Blade. References: Check Point IPS Datasheet, Check Point IPS Software Blade, Quantum Intrusion Prevention System (IPS)
NEW QUESTION # 206
Fill in the blanks: The _______ collects logs and sends them to the _______.
- A. Security Gateways; log server
- B. Security management server; Security Gateway
- C. Log server; security management server
- D. Log server; Security Gateway
Answer: A
Explanation:
Gateways send their logs to the log server.
NEW QUESTION # 207
You manage a global network extending from your base in Chicago to Tokyo, Calcutta and Dallas. Management wants a report detailing the current software level of each Enterprise class Security Gateway. You plan to take the opportunity to create a proposal outline, listing the most cost-effective way to upgrade your Gateways. Which two SmartConsole applications will you use to create this report and outline?
- A. SmartLSM and SmartUpdate
- B. SmartView Monitor and SmartUpdate
- C. SmartView Tracker and SmartView Monitor
- D. SmartDashboard and SmartView Tracker
Answer: B
NEW QUESTION # 208
When should you generate new licenses?
- A. Only when the license is upgraded.
- B. After a device upgrade.
- C. When the existing license expires, license is upgraded or the IP-address associated with the license changes.
- D. Before installing contract files.
Answer: B
NEW QUESTION # 209
What is NOT an advantage of Packet Filtering?
- A. Scalability
- B. Application Independence
- C. Low Security and No Screening above Network Layer
- D. High Performance
Answer: C
Explanation:
Explanation
Packet filtering is a technique that controls the flow of network data by examining the headers of packets and applying a set of rules to accept or reject them. Packet filtering has some advantages, such as efficiency, cost-effectiveness, ease of use, and transparency3. However, it also has some disadvantages, such as low security and no screening above the network layer4. Packet filtering firewalls cannot inspect the payload of packets or the application layer protocols, which makes them vulnerable to attacks that exploit higher-level vulnerabilitie
NEW QUESTION # 210
DLP and Geo Policy are examples of what type of Policy?
- A. Standard Policies
- B. Shared Policies
- C. Inspection Policies
- D. Unified Policies
Answer: B
Explanation:
Explanation
DLP and Geo Policy are examples of Shared Policies. Shared Policies are policies that can be shared with other policy packages to save time and effort when managing multiple gateways with similar security requirements. Shared Policies can be applied to Access Control, Threat Prevention, and HTTPS Inspection layers. Other types of policies include Inspection Policies, Unified Policies, and Standard Policies. References:
[Check Point R81 Security Management Administration Guide], [Check Point R81 SmartConsole R81 Resolved Issues]
NEW QUESTION # 211
If the Active Security Management Server fails or if it becomes necessary to change the Active to Standby, the following steps must be taken to prevent data loss. Providing the Active Security Management Server is responsible, which of these steps should NOT be performed:
- A. Change the Standby Security Management Server to Active.
- B. Change the Active Security Management Server to Standby.
- C. Manually synchronize the Active and Standby Security Management Servers.
- D. Rename the hostname of the Standby member to match exactly the hostname of the Active member.
Answer: D
Explanation:
Explanation
The correct answer is A because renaming the hostname of the Standby member to match exactly the hostname of the Active member is not a recommended step to prevent data loss. The hostname of the Standby member should be different from the hostname of the Active member1. The other steps are necessary to ensure a smooth failover and synchronization between the Active and Standby Security Management Servers2.
References: Check Point R81.20 Administration Guide, 156-315.81 Checkpoint Exam Info and Free Practice Test
NEW QUESTION # 212
Which option, when applied to a rule, allows traffic to VPN gateways in specific VPN communities?
- A. All Connections (Clear or Encrypted)
- B. All Site-to-Site VPN Communities
- C. Specific VPN Communities
- D. Accept all encrypted traffic
Answer: D
Explanation:
The first rule is the automatic rule for the Accept All Encrypted Traffic feature. The Firewalls for the Security Gateways in the BranchOffices and LondonOffices VPN communities allow all VPN traffic from hosts in clients in these communities. Traffic to the Security Gateways is dropped. This rule is installed on all Security Gateways in these communities.
2. Site to site VPN - Connections between hosts in the VPN domains of all Site to Site VPN communities are allowed. These are the only protocols that are allowed: FTP, HTTP, HTTPS and SMTP.
3. Remote access - Connections between hosts in the VPN domains of RemoteAccess VPN community are allowed. These are the only protocols that are allowed: HTTP, HTTPS, and IMAP.
NEW QUESTION # 213
The organization's security manager wishes to back up just the Gaia operating system parameters.
Which command can be used to back up only Gaia operating system parameters like interface details, Static routes and Proxy ARP entries?
- A. backup
- B. show configuration
- C. upgrade export
- D. migrate export
Answer: A
NEW QUESTION # 214
Name one limitation of using Security Zones in the network?
- A. Security zones will not work in firewall policy layer
- B. Security zone will not work in Manual NAT rules
- C. Security zones will not work in Automatic NAT rules
- D. Security zones cannot be used in network topology
Answer: B
Explanation:
Explanation
One limitation of using Security Zones in the network is that Security Zones will not work in Manual NAT rules. Manual NAT rules are rules that explicitly define how to translate the source and destination IP addresses and ports of each connection. Manual NAT rules do not support using Security Zones as objects, only network objects or groups. Automatic NAT rules are rules that automatically define how to translate the source and destination IP addresses and ports of each connection based on the network objects or groups properties. Automatic NAT rules support using Security Zones as objects. Security Zones can also work in firewall policy layer and network topology.References: [Security Zones Best Practices], [NAT Methods]
NEW QUESTION # 215
......
Master 2024 Latest The Questions Checkpoint Certified Security Administrator and Pass 156-215.81 Real Exam!: https://www.realvce.com/156-215.81_free-dumps.html
Practice To 156-215.81 - RealVCE Remarkable Practice On your Check Point Certified Security Administrator R81 Exam: https://drive.google.com/open?id=1lIvhsXAVtWuZStmmotxk2RzYXoPXuFJ0