Full JN0-230 Practice Test and 85 unique questions with explanations waiting just for you!
JNCIA-SEC Dumps JN0-230 Exam for Full Questions - Exam Study Guide
NEW QUESTION 47
Which security feature is applied to traffic on an SRX Series device when the device is running n packet mode?
- A. Sky ATP
- B. ALGs
- C. Unified policies
- D. Firewall filters
Answer: D
NEW QUESTION 48
Users should not have access to Facebook, however, a recent examination of the logs security show that users are accessing Facebook.
Referring to the exhibit,
what should you do to solve this problem?
- A. Change the Internet-Access rule from a zone policy to a global policy
- B. Change the source address for the Block-Facebook-Access rule to the prefix of the users
- C. Move the Block-Facebook-Access rule before the Internet-Access rule
- D. Move the Block-Facebook-Access rule from a zone policy to a global policy
Answer: C
NEW QUESTION 49
Users on the network are restricted from accessing Facebook, however, a recent examination of the logs show that users are accessing Facebook.
Referring to the exhibit,
Why is this problem happening?
- A. Zone-based rules are honored before global rules
- B. The internet-Access rule is listed first
- C. Global rules are honored before zone-based rules.
- D. The internet-Access rule has a higher precedence value
Answer: C
NEW QUESTION 50
Which two statements are true about the null zone? (Choose two.)
- A. The null zone is a user-defined zone
- B. All interface belong to the bull zone by default.
- C. All traffic to the null zone is allowed
- D. All traffic to the null zone is dropped.
Answer: A,C
NEW QUESTION 51
Users should not have access to Facebook, however, a recent examination of the logs security show that users are accessing Facebook.
Referring to the exhibit,
what should you do to solve this problem?
- A. Change the Internet-Access rule from a zone policy to a global policy
- B. Change the source address for the Block-Facebook-Access rule to the prefix of the users
- C. Move the Block-Facebook-Access rule before the Internet-Access rule
- D. Move the Block-Facebook-Access rule from a zone policy to a global policy
Answer: C
NEW QUESTION 52
BY default, revenue interface are placed into which system-defined security zone on an SRX series device?
- A. Trust
- B. Junos-trust
- C. untrust
- D. Null
Answer: A
NEW QUESTION 53
Which two segments describes IPsec VPNs? (Choose two.)
- A. IPsec VPN traffic is always authenticated.
- B. IPsec VPN traffic is always encrypted.
- C. IPsec VPNs are dedicated physical connections between two private networks.
- D. IPsec VPNs use security to secure traffic over a public network between two remote sites.
Answer: A,D
NEW QUESTION 54
You have configured antispam to allow e-mail from example.com, however the logs you see [email protected] blocked Referring to the exhibit.
What are two ways to solve this problem?
- A. Verify connectivity with the SBL server.
- B. [email protected] the profile antispam address blacklist
- C. [email protected] the profile antispam address whitelist.
- D. [email protected] the profile antispam address whitelist
Answer: C
NEW QUESTION 55
Which statements is correct about SKY ATP?
- A. Sky ATP is used to automatically push out changes to the AppSecure suite.
- B. Sky ATP only support sending threat feeds to vSRX Series devices
- C. Sky ATP is a cloud-based security threat analyzer that performs multiple tasks
- D. Sky ATP is an open-source security solution.
Answer: C
NEW QUESTION 56
Which two statements are correct about global security policies? (choose two)
- A. Global based policies must reference the source and destination zones
- B. Global based policies can reference the destination zone
- C. Global based policies can reference the source zone
- D. Global based policies must reference a dynamic application
Answer: B,C
NEW QUESTION 57
On an SRX Series device, how should you configure your IKE gateway if the remote endpoint is a branch office-using a dynamicIP address?
- A. Configure the IPsec policy to use MDS authentication.
- B. Configure the IKE policy to use aggressive mode.
- C. Configure the IKE policy to use a static IP address
- D. Configure the IPsec policy to use aggressive mode.
Answer: A
NEW QUESTION 58
Which two match conditions would be used in both static NAT and destination NAT rule sets? (Choose two.)
- A. Source interface
- B. Destination zone
- C. Source zone
- D. Destination interface
Answer: C,D
NEW QUESTION 59
Referring to the exhibit.
****Exhibit is Missing****
Which type of NAT is performed by the SRX Series device?
- A. Destination NAT without PAT
- B. Destination NAT with PAT
- C. Source NAT with PAT
- D. Source Nat without PAT
Answer: B
NEW QUESTION 60
On an SRX device, you want to regulate traffic base on network segments.
In this scenario, what do you configure to accomplish this task?
- A. Screens
- B. Zones
- C. ALGs
- D. NAT
Answer: A
NEW QUESTION 61
What should you configure if you want to translate private source IP address to a single public IP address?
- A. Content filtering
- B. Source NAT
- C. Destination NAT
- D. Security Director
Answer: D
NEW QUESTION 62
Your company has been assigned one public IP address. You want to enable Internet traffic to reach multiple servers in your DMZ that are configured with private IP addresses.
In this scenario, which type of NAT would be used to accomplish this task?
- A. source NAT
- B. NAT without PAT
- C. destination NAT
- D. static NAT
Answer: A
NEW QUESTION 63
Which two statements are true about security policies in the factory-default configuration of an SRX340?
(Choose two.)
- A. All traffic from the untrust zone to the trust zone is denied.
- B. All traffic from the trust zone to the untrust zone is allowed.
- C. All interzone traffic is allowed.
- D. All interzone traffic is denied.
Answer: A,B
NEW QUESTION 64
You want to integrate an SRX Series device with SKY ATP.
What is the first action to accomplish task?
- A. Copy the operational script from the Sky ATP Web UI.
- B. Create an account with the Sky ATP Web UI.
- C. Create the SSL VPN tunnel between the SRX Series device and Sky ATP.
- D. Issue the commit script to register the SRX Series device.
Answer: C
NEW QUESTION 65
You are designing a new security policy on an SRX Series device. You must block an application silently and log all occurrences of the application access attempts.
In this scenario, which two actions must be enabled in the security policy? (Choose two.)
- A. Log the session closures.
- B. Enable a deny action.
- C. Enable a reject action.
- D. Log the session initiations.
Answer: B,D
NEW QUESTION 66
What should you configure if you want to translate private source IP address to a single public IP address?
- A. Content filtering
- B. Security Director
- C. Destination NAT
- D. Source NAT
Answer: D
NEW QUESTION 67
Which two statements are true regarding zone-based security policies? (Choose two.)
- A. Zone-based policies must reference a source address in the match criteria.
- B. Zone-based policies must reference a URL category in the match criteria.
- C. Zone-based policies must reference a dynamic application in the match criteria.
- D. Zone-based policies must reference a destination address in the match criteria
Answer: A,C
NEW QUESTION 68
What is a characteristic of the Junos enhanced Web filtering solution ?
- A. Junos Enhanced Web filtering allows the SRX series device to categorize URLs using an on-premises websense server.
- B. The SRX series device intercepts HTTP and HTTPS request and send the source IP address to the on-premises Websense server
- C. The Websense cloud categorize the URLs and also provide site reputation information.
- D. The Websense cloud resolves the categorized URLs to IP addresses by performing a DNS reverse loockup
Answer: A
NEW QUESTION 69
Click the Exhibit button
You have configured source ... Being received By the SRX series Which features must be configured
- A. Reverse static NAT
- B. Proxy ARP
- C. Port Forwarding
- D. Destination NAT
Answer: B
NEW QUESTION 70
......
Authentic Best resources for JN0-230 Online Practice Exam: https://www.realvce.com/JN0-230_free-dumps.html