F5 201 Practice Test Pdf Exam Material
201 Answers 201 Free Demo Are Based On The Real Exam
Difficulty in Attempting F5-201: TMOS Administration Exam
If the user has successfully passed the F5-201 practice exam and has been through F5-201 exam dumps then the certification exam will not be too much difficult as the user has shown aptitude for understanding complicated processes.
NEW QUESTION 119
Refer to the exhibit
A connection is being established to IP 1.1.1.1 on port 8080.
Which virtual server will handle the connection?
- A. host_vs
- B. host_ 8080_VS
- C. fwd_8080_vs
- D. fwdvs
Answer: A
NEW QUESTION 120
Which two can be a part of a virtual server's definition. (Choose two.)
- A. rule(s)
- B. monitor(s)
- C. pool(s)
- D. loadElbalancing method(s)
- E. node address(es)
Answer: A,C
NEW QUESTION 121
A virtual server is configured to offload SSL from a pool of backend servers. When users connect to the virtual server, they successfully establish an SSL connection but no content is displayed. A packet trace performed on the server shows that the server receives and responds to the request. What should a BIG-IP Administrator do to resolve the problem?
- A. enable SNAT
- B. enable Server SSL profile
- C. disable Server SSL profile
- D. disable SNAT
Answer: C
NEW QUESTION 122
Refer to the exhibit.
According to the shown Configuration Utility stings What is the setting of the User Directory configuration under the Authentication submenu?
- A. Remote-TACACS+
- B. Managed
- C. Local
- D. Default system configuration
Answer: A
NEW QUESTION 123
An application is configured so that the same pool member must be used for an entire session, as well as for HTTP and FTP traffic.
A user reports that a session has terminated, and the user must restart the session. The BIG-IP Administrator determines that the active BIG-IP device failed over to the standby BIG-IP device. Which configuration settings should the BIG-IP Administrator verify to ensure proper behaviour when BIG-IP failover occurs?
- A. Stateful failover and Network Failover detection
- B. cookie persistence and session timeout
- C. syn-cookie insertion threshold and connection low-water mark
- D. Persistence mirroring and Match Across Services
Answer: D
NEW QUESTION 124
Which two can be a part of a virtual server's definition? (Choose two.)
- A. rule(s)
- B. monitor(s)
- C. pool(s)
- D. node address(es)
- E. loadbalancing method(s)
Answer: A,C
NEW QUESTION 125
A virtual server is listening at 10.10.1.100:any and has the following iRule associated with it: when CLIENT_ACCEPTED { if {[TCP::local_port] equals 21 } { pool ftppool } elseif {[TCP::local_port] equals 23 } { pool telnetpool } If a user connects to 10.10.1.100 and port 22, which pool will receive the request.
- A. None. The request will be dropped.
- B. telnetpool
- C. ftppool
- D. Unknown. The pool cannot be determined from the information provided.
Answer: D
NEW QUESTION 126
Assume a virtual server is configured with a ClientSSL profile. What would the result be if the virtual server's destination port were not 443?
- A. Virtual servers with a ClientSSL profile are always configured with a destination port of 443.
- B. Since the virtual server is associated with a ClientSSL profile, it will always process traffic sent to port 443.
- C. SSL termination could not be performed if the virtual server's port was not port 443.
- D. As long as client traffic was directed to the alternate port, the virtual server would work as intended.
Answer: D
NEW QUESTION 127
A Virtual Server uses an iRule to send traffic to pool members depending on the URI. The BIG-IP Administrator needs to modify the pool member in the iRule.
Which event declaration does the BIG-IP Administrator need to change to accomplish this?
- A. CLIENT_ACCEPTED
- B. SERVER_CONNECTED
- C. HTTP_REQUEST
- D. HTTP_RESPONSE
Answer: C
Explanation:
According to the UR! distribution is the category of HTTP requests, need to trigger HTTP_REQUEST event.
NEW QUESTION 128
All pool members are online. All other virtual server settings are at default What might after the load balancing behavior?
- A. enabing SNAT automap
- B. adding a oneconnect profile
- C. enabing a falback host in the http profile
- D. adding a persistence profile
Answer: D
NEW QUESTION 129
Which statement is true concerning a functional iRule?
- A. iRules must contain at least one conditional statement.
- B. iRules use a proprietary syntax language.
- C. iRules must contain at least one event declaration.
- D. iRules must contain at least one pool assignment statement.
Answer: C
NEW QUESTION 130
A pool of four servers has been partially upgraded for two new servers with more memory and CPU capacity.
The BIG-IP Administrator must change the load balance method to consider more connections for the two new servers. Which load balancing method considers pool member CPU and memory load?
- A. Round Robin
- B. Dynamic Ratio
- C. Least Connection
- D. Ratio
Answer: D
NEW QUESTION 131
For a given Virtual Server, the BIG-IP must perform SSL Offload and negotiate secure communication overTLSvl.2only.
What should the BIG-IP Administrator do to meet this requirement?
- A. Configure a custom SSL Profile (Client) with a custom TLSV1.2 cipher string
- B. Configure a custom SSL Profile (Server) and select no TLSvl in the options list
- C. Configure a custom SSL Profile (Server) with a custom TLSV1.2 cipher string
- D. Configure a custom SSL Profile (Client) and select no TLSvl in the options list
Answer: A
Explanation:
no TLSvl only disables TLS1.0, TLS1.1 is still used and does not meet the requirements.
NEW QUESTION 132
A BIG-IP Administrator has configured a BIG-IP cluster with remote user authentication against dcOl f5trn.com. Only local users can successfully log into the system. Configsync is also failing.
Which two tools should the 8IG-IP Administrator use to further investigate these issues? (Choose two)
- A. ntpq
- B. pam_timestamp_check
- C. dig
- D. pwck
- E. passwd
Answer: A,E
NEW QUESTION 133
If a client's browser does not accept cookies, what occurs when the client connects to a virtual server using cookie persistence.
- A. The connection request is refused and the client is sent a "server not available" message.
- B. The connection request is loadElbalanced to an available pool member.
- C. The connection request is not processed.
- D. The connection request is sent to an
pology.server.The connection request is sent to an .pology.server.
Answer: B
NEW QUESTION 134
A standard virtual server is defined with a pool and a SNAT using automap. All other settings for the virtual server are at defaults. When client traffic is processed by the BIGElIP, what will occur to the IP addresses.
- A. Traffic initiated to the virtual server will have the destination address translated to a pool member address and the source addressTraffic initiated to the virtual server will have the destination address translated to a pool member. address and the source address translated to a selfElIP address. Traffic arriving destined to other destinations will have the source translated to a selfElIP address only.
- B. Traffic initiated to the virtual server will have the destination address translated to a pool member address and the source addressTraffic initiated to the virtual server will have the destination address translated to a pool member. address and the source address translated to a selfElIP address.
- C. Traffic initiated by the pool members will have the source address translated to a selfElIP address but the destination address will not be changed.
- D. Traffic
initiated by selected clients, based
on their IP address, will have the source address translated to a selfElIP address but the destination will only be translated if the traffic is destined to the virtual server.
Answer: B
NEW QUESTION 135
A standard virtual server is defined with a pool and a SNAT using automap. All other settings for the virtual server are at defaults. When client traffic is processed by the BIG-IP, what will occur to the IP addresses?
- A. Traffic initiated to the virtual server will have the destination address translated to a pool member address and the source address translated to a self-IP address. Traffic arriving destined to other destinations will have the source translated to a self-IP address only.
- B. Traffic initiated to the virtual server will have the destination address translated to a pool member address and the source address translated to a self-IP address.
- C. Traffic initiated by the pool members will have the source address translated to a self-IP address but the destination address will not be changed.
- D. Traffic initiated by selected clients, based on their IP address, will have the source address translated to a self-IP address but the destination will only be translated if the traffic is destined to the virtual server.
Answer: B
NEW QUESTION 136
Which statement is true concerning SNATs using automap?
- A. SNATs using automap will translate all client addresses to an automap address.
- B. A SNAT using automap will preferentially use a floating self-IP over a nonfloating self-IP.
- C. Only specified self-IP addresses are used as automap addresses.
- D. A SNAT using automap can be used to translate the source address of all outgoing traffic to the same address regardless of which VLAN the traffic is sent through.
Answer: B
NEW QUESTION 137
What is the purpose of MAC masquerading.
- A. to minimize ARP entries on routers
- B. to allow both BIGElIP devices to simultaneously use the same MAC address
- C. to prevent ARP cache errors
- D. to minimize connection loss due to ARP cache refresh delays
Answer: D
NEW QUESTION 138
A BIG-IP Administrator discovers malicious brute-force attempts to access the BIG-IP device on the management interface via SSH. The BIG-IP Administrator needs to restrict SSH access to the management interface.
Where should this be accomplished?
- A. System > Platform
- B. Network > Interfaces
- C. Network > Self IPs
- D. System > Configuration
Answer: A
NEW QUESTION 139
The incoming client IP address is 205.12.45.52. The last five connections have been sent to members C, D, A, B, B. Given the virtual server and pool definitions and the statistics shown in the graphic, which member will be used for the next connection?
- A. 10.10.20.4:80
- B. 10.10.20.1:80
- C. 10.10.20.5:80
- D. 10.10.20.3:80
- E. 10.10.20.2:80
Answer: B
NEW QUESTION 140
The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. If a pool eb.is marked vailable.
The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. If a pool .eb.is marked .vailable (green) which situation is sufficient to cause this.
- A. All of the eb.pool member
nodes are responding to the
ICMP monitor
as expected.All of the .eb.pool. member. nodes are responding to the ICMP monitor as expected. - B. All of the members of the eb.pool have had their content updated recently and their responses no longer match the monitor receiveAll of the members of the .eb.pool have had their content updated recently and their responses no longer match the monitor. receive rule.
- C. Less than 50% of the eb.pool member nodes responded to the ICMP echo request.Less than 50% of the .eb.pool. member. nodes responded to the ICMP echo request.
- D. Over 25% of the eb.pool members have had their content updated and it no longer matches the receive rule of the custom monitor.Over 25% of the
.eb.pool. members have had their content updated and it no longer matches the receive rule of the custom monitor. The other respond as expected.The other. respond as expected.
Answer: D
NEW QUESTION 141
A BIG-IP Administrator is performing maintenance on the active BIG-IP device of an HA pair. The BIG-IP Administrator needs to minimize traffic disruptions.
What should the BIG-IP Administrator do to start the maintenance activity?
- A. Disable switch ports of the BIG-IP device.
- B. Force the BIG-IP device to standby.
- C. Reboot the BIG-IP device.
- D. Move resources to a new Traffic Group.
Answer: B
NEW QUESTION 142
Which statement is true about the synchronization process, as performed by the Configuration Utility or by typing b config sync all?
- A. The process should always be run from the standby system.
- B. Multiple files, including /config/bigip.conf and /config/bigip_base.conf, are synchronized (made identical) each time the process is run.
- C. The two /config/bigip.conf configuration files are synchronized (made identical) each time the process is run.
- D. The process should always be run from the system with the latest configuration.
Answer: C
NEW QUESTION 143
......
Introduction to F5-201: TMOS Administration Exam
The qualified candidate is capable of performing day-to-day operations of TMOS-based devices which have already been installed. They are also capable of basic troubleshooting of a TMOS-based device in order to provide full, accurate, and appropriate information to senior engineers and/or F5 Support.
They can do any of the following without assistance:
- Able to access and manage the BIG-IP through multiple paths (management IP, Self IP)
- Open a support case and utilize online resources such as AskF5, F5 iHealth, and DevCentral
- Perform software management functions on the platform (for example, capable of performing upgrades and licensing).
- Understand the relationship and differentiation between virtual servers, virtual server types, virtual addresses, pools, pool members, nodes, profiles, iRules, and address translation (NAT/SNAT)
- Be familiar with HTTP, ClientSSL, ServerSSL, TCP, UDP, and persistence profiles
F5 201 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
201 [Jan-2023] Newly Released] Exam Questions For You To Pass: https://www.realvce.com/201_free-dumps.html
F5 201 Exam: Basic Questions With Answers: https://drive.google.com/open?id=17MsSc5IlNY2bPm9nxfedT4riGCedcVYg