BEST Verified HP HPE0-J69 Exam Questions (2025)
The Best Practice Test Preparation for the HPE0-J69 Certification Exam
HPE0-J69 certification exam is designed to validate the candidate's ability to design, implement, and manage HPE storage solutions. HPE0-J69 exam covers various topics, including HPE storage solutions, storage architectures and technologies, HPE storage products, and storage management. HPE0-J69 exam also covers advanced topics, such as data protection, data retention, and data recovery.
NEW QUESTION # 14
A customer is planning to connect a new HPE 3PAR StoreServ system to its existing Synergy based composable infrastructure via direct-attach.
Which tool would be used to manage the storage?
- A. HPE SAN Network Advisor
- B. HPE InfoSight for 3PAR
- C. HPE Synergy Composer
- D. HPE Synergy Image Streamer
Answer: C
NEW QUESTION # 15
Which resource provides configurations for HPE tested and referenced configurations in a software-defined storage environment?
- A. NinjaStars
- B. HPE Storage Sizer
- C. StoreVirtual VSA Ready Nodes
- D. One Config Advanced
Answer: C
Explanation:
Explanation
HPE StoreVirtual VSA Ready Nodes-HPE tested reference configurations on HPE ProLiant servers that address typical virtualization and remote office use cases, and deployment of converged solutions.
NEW QUESTION # 16
What is the purpose of WWN in FC SAN? (Choose two.)
- A. Identification of zone members
- B. Forward translation of DNS entries
- C. Identification of entities denied access to a volume
- D. Identification of entities via Storage Name Server (SNS)
- E. Load balanced frame delivery
Answer: B,D
NEW QUESTION # 17
A customer asks you for a recommendation on setting up their new StoreOnce appliance. They plan to use NetBackup and need the highest performance setup they can get. Their local hosts are connected via FC and the rest are connected via a WAN.
Which backup target type should you recommend?
- A. CIFS
- B. S3
- C. Catalyst
- D. VTL
Answer: D
NEW QUESTION # 18
A customer is implementing a new high performance database environment.
What type of storage should you recommend?
- A. scale-out storage
- B. object store
- C. system-defined storage
- D. network-attached storage
Answer: A
NEW QUESTION # 19
Which tool is used to configure an HPE MSA 2052?
- A. SSMC
- B. InfoSight
- C. SMU
- D. CMC
Answer: B
NEW QUESTION # 20
Exhibit:
Which fabric design is shown?
- A. core-edge
- B. cascaded
- C. single fabric
- D. meshed
Answer: D
NEW QUESTION # 21
You are proposing a new Nimble solution to a customer that recently experienced data loss in their existing storage array.
Which features of the Nimble array should you emphasize to your customer to address their concerns?
(Choose two.)
- A. compression
- B. triple party
- C. quick RAID rebuild
- D. encryption
- E. deduplication
Answer: A,E
NEW QUESTION # 22
You need to create an N:M relationship between VMware hypervisors and virtual volumes with the least amount of administrative overhead.
Click the option where you can create a group of VMware hypervisors for volumes provisioning.
Answer:
Explanation:
Explanation
Graphical user interface, text Description automatically generated
NEW QUESTION # 23
A customer is planning to replace their existing LTO-6 tape library with a new HPE StoreEver MSL2024 tape library. They want to reuse their existing LTO-6 tape cartridges for reads and writes.
What is the latest tape drive technology that will provide backward compatibility?
- A. LTO7
- B. LTO6
- C. LTO8
- D. LTO5
Answer: A
NEW QUESTION # 24
Which StoreOnce Gen4 features are included with the system software without additional licenses? (Choose two.)
- A. Encryption
- B. Catalyst
- C. Cloud Bank
- D. VTL/NAS replication
- E. Flexible I/O HBAs
Answer: B,D
NEW QUESTION # 25
You are designing a new storage environment for a customer. They need good performance, but need to keep costs to a minimum.
They have a very limited staff, and staff is concerned about learning new technologies. You plan to recommend a Nimble HF20 solution.
Which storage connectivity components should you recommend?
- A. FlexFabric switches, Nimble iSCSI card. FC adapters for servers
- B. FC switches, Nimble FC card, FC adapters for servers
- C. Ethernet switches, Nimble FC card, dedicated FC for servers
- D. Ethernet switches, Nimble iSCSI card, dedicated NICs for servers
Answer: D
NEW QUESTION # 26
Which feature enables a non-disruptive environment where host-based multi-pathing software is not affected in the event of a firmware upgrade?
- A. HPE 3PAR Persistent Cache
- B. HPE 3PAR MPIO
- C. HPE 3PAR Persistent Ports
- D. HPE 3PAR Access Guard
Answer: C
NEW QUESTION # 27
You deployed and configured an all-flash Nimble array. The customer wants to attach their Windows-based server to the array.
Which HPE tool can you use on the host server to make the integration easier?
- A. Channel bonding
- B. Connection Manager
- C. StorServe Management Console
- D. Centralized Management Console
Answer: B
NEW QUESTION # 28
You need to deploy a Recovery Manager Central appliance and integrate it with a customer's 3PAR system.
Which information must be collected from the customer in order to proceed with the installer? (Choose two.)
- A. IP address of the RMC
- B. NFS path
- C. StoreOnce store name
- D. vCenter IP address or hostname
- E. HPE 3PAR used capacity
Answer: A,E
NEW QUESTION # 29
An HPE 3PAR StoreServ customer with FC, SSD and NL, drives is facing extreme latency during peak business hours with an OLTP application. They have enabled tiering using all drive types.
What could be used to resolve the issue?
- A. Dynamic Optimization using tier 2
- B. Adaptive Optimization using tier 1
- C. Dynamic Optimization between tier 0 and tier 1
- D. Dynamic Optimization using tier 1
Answer: C
Explanation:
Explanation
During a peak period when performance is critical, the VV can be optimized by moving to faster disk and the RAID level.
NEW QUESTION # 30
You are designing an HPE MSA iSCSI for a customer.
Which components are typically part of the solution? (Choose two.)
- A. All-inclusive Multi-system software
- B. Drives
- C. SFPs
- D. Service Processor
- E. Switch zones
Answer: B,C
NEW QUESTION # 31
A customer has an HPE 3PAR StoreServ 8200 with eight 3.84 TB SSD's configured with RAID5 7+1. They plan to add four more 3.84 TB SSD's.
What needs to be changed on the configuration once the new SSD's are installed?
- A. Adjust the cpg growth value to match amount of SSD's.
- B. Reconfigure the cpg setsize as RAID6 6+2 and wait for tunesys to complete.
- C. Change the cpg setsize to RAID5 5+1 and run tunesys.
- D. Change the availability level from cage to magazine.
Answer: C
NEW QUESTION # 32
You are installing an HPE 3PAR StoreServ solution and need to integrate the array with the 3rd party monitoring application customer is using.
Which technology can be configured at 3PAR to support forwarding events from the array to the customer's monitoring application?
- A. DMI
- B. NTP
- C. IPMI
- D. SNMPv3
Answer: D
NEW QUESTION # 33
......
HPE0-J69 Exam Dumps, Practice Test Questions BUNDLE PACK: https://www.realvce.com/HPE0-J69_free-dumps.html
HPE ASE Certification HPE0-J69 Sample Questions Reliable: https://drive.google.com/open?id=1UTY_DY4RQLRCgS-9anWVm740tn-SY-o0