2024 Updated Verified 5V0-22.23 Downloadable Printable Exam Dumps
The Ultimate VMware 5V0-22.23 Dumps PDF Review
VMware vSAN Specialist (v2) certification is beneficial for professionals who want to demonstrate their expertise in VMware vSAN solutions and advance their career in the virtualization and storage infrastructure domain. VMware vSAN Specialist (v2) certification is also recognized by industry leaders and can help professionals to gain credibility and recognition in the market.
NEW QUESTION # 37
An administrator must choose between deploying a virtual witness or a physical witness for a vSAN Stretched Cluster. The administrator eventually decides to use a virtual witness.
What is a benefit of selecting this approach?
- A. Increased vSAN datastore capacity
- B. Reduced vSphere licensing
- C. Additional compute capacity for running VMs
- D. Shared metadata between separate clusters
Answer: B
Explanation:
Explanation
The correct answer is C, reduced vSphere licensing. This is because using a virtual witness appliance instead of a physical witness host can save on vSphere licensing costs, as the virtual witness appliance does not consume a vSphere license. The virtual witness appliance is a preconfigured virtual machine that runs ESXi and is distributed as an OVA file. It can be deployed on any ESXi host that has network connectivity to both data sites of the stretched cluster. The virtual witness appliance does not run any virtual machines other than itself and only hosts witness components of virtual machine objects. The other options are incorrect for the following reasons:
A, increased vSAN datastore capacity, is incorrect because using a virtual witness appliance does not affect the vSAN datastore capacity. The witness appliance does not store any customer data, only metadata, such as the size and UUID of vSAN object and components. The witness appliance also does not contribute any storage devices to the vSAN datastore.
B, shared metadata between separate clusters, is incorrect because using a virtual witness appliance does not enable sharing metadata between separate clusters. The witness appliance is dedicated to one stretched cluster and cannot serve as a witness for multiple clusters. The witness appliance maintains consistency between the two data sites of the stretched cluster by hosting witness components that act as tie-breakers in case of a site failure or network partition.
D, additional compute capacity for running VMs, is incorrect because using a virtual witness appliance does not provide additional compute capacity for running VMs. The witness appliance does not run any VMs other than itself and does not participate in any compute operations of the stretched cluster. The witness appliance only hosts witness components that consume minimal CPU and memory resources.
References:
VMware vSAN Specialist v2 Exam Preparation Guide, page 11
Deploying a vSAN Witness Appliance
NEW QUESTION # 38
What is the purpose of host rebuild reserve in vSAN?
- A. Reserves space for internal operations
- B. Stores vSphere HA heartbeats
- C. Reserves space in case of single host failure
- D. Allocates capacity for vCLS
Answer: C
Explanation:
Explanation
The host rebuild reserve is a feature that allows vSAN to reserve space in the cluster for vSAN to be able to repair in case of a single host failure. This reservation is set to one host worth of capacity, which means that if one host in the vSAN cluster fails and no longer contributes storage, there is still sufficient capacity remaining in the cluster to rebuild and re-protect all vSAN objects. This feature prevents the creation of new VMs or powering on VMs if such operations consume the reserved space. By default, the host rebuild reserve is disabled, but it can be enabled in the vSAN Services configuration. The other options are not related to the hostrebuild reserve. References: vSAN Capacity Management in v7.0U1; Configure Reserved Capacity
NEW QUESTION # 39
Which vSAN maintenance mode option should be used to avoid storage policy non-compliance?
- A. Full data migration
- B. Partial maintenance mode
- C. Ensure accessibility
- D. No data migration
Answer: A
Explanation:
Explanation
To avoid storage policy non-compliance, the vSAN maintenance mode option that should be used is Full data migration. This option evacuates all data from the host to other hosts in the cluster and maintains the current object compliance state. This means that the VM objects will have access to all their replicas and will be compliant with their assigned storage policies. The other options might result in storage policy non-compliance, as they do not guarantee full data redundancy or policy adherence. Ensure accessibility only migrates the components that are essential for running the VMs, but might not have access to all their replicas.
Partial maintenance mode is not a valid option for vSAN clusters. No data migration does not evacuate any data from the host and might result in VM unavailability or data loss. References: Working with Maintenance Mode; Place a Member of vSAN Cluster in Maintenance Mode
NEW QUESTION # 40
What are two prerequisites for using the TRIM and UNMAP capability of vSAN? (Choose two.)
- A. Change the Object Space Reservation to 100.
- B. The VM quest operating system supports ATA TRIM or SCSI UNMAP capability
- C. Deduplication and compression are enabled.
- D. The vSAN cluster is an all-flash architecture.
- E. TRIM and UNMAP is enabled.
Answer: D,E
Explanation:
Explanation
The two prerequisites for using the TRIM and UNMAP capability of vSAN are:
B: The vSAN cluster is an all-flash architecture. TRIM and UNMAP are only supported on all-flash vSAN clusters, as they can reclaim space from flash devices that use thin provisioning. TRIM and UNMAP are not supported on hybrid vSAN clusters, as they cannot reclaim space from magnetic disks that use thick provisioning1.
D: TRIM and UNMAP is enabled. TRIM and UNMAP are disabled by default in vSAN, as they might have a performance impact on some workloads. To enable TRIM and UNMAP on a vSAN cluster, the administrator must use the following RVC command: vsan.unmap_support -enable2. After enabling TRIM and UNMAP, the administrator must power off and then power on all VMs that use the vSAN datastore.
NEW QUESTION # 41
After a server power failure, the administrator noticed the scheduled resyncing in the cluster monitor displays objects to be resynchronized under the pending category.
Why are there objects in this category?
- A. The delay timer has not expired.
- B. These objects belong to virtual machines, which are powered off.
- C. There are too many objects to be synchronized.
- D. Object resynchronization must be started manually.
Answer: A
Explanation:
Explanation
The reason why there are objects in the pending category of the scheduled resyncing in the cluster monitor is that the delay timer has not expired. The delay timer is a configurable setting that determines how long vSAN waits before repairing a non-compliant object after placing a host in a failed state or maintenance mode. The default value is 60 minutes, but it can be changed in the vSAN Services configuration. The pending category displays the objects with the expired delay timer that cannot be resynchronized due to insufficient resources in the current cluster or the vSAN FTT policy set on the cluster not being met. The other options are not correct.
These objects do not belong to virtual machines that are powered off, as vSAN resynchronizes all objects regardless of their power state. Object resynchronization does not need to be started manually, as vSAN initiates it automatically when the delay timer expires. There are not too many objects to be synchronized, as vSAN can handle multiple resynchronization tasks in parallel. References: Monitor the Resynchronization Tasks in the vSAN Cluster; About vSAN Cluster Resynchronization
NEW QUESTION # 42
Which VMware solution requires vSAN usage?
- A. VMware Cloud Foundation
- B. VMware Horizon
- C. VMware Aria Automation
- D. VMware Telco Cloud Automation
Answer: A
Explanation:
Explanation
The VMware solution that requires vSAN usage is VMware Cloud Foundation. VMware Cloud Foundation is an integrated software stack that bundles compute virtualization (VMware vSphere), storage virtualization (VMware vSAN), network virtualization (VMware NSX), and cloud management and monitoring (VMware vRealize Suite) into a single platform that can be deployed on premises or as a service within a public cloud.
VMware Cloud Foundation relies on vSAN as the primary storage solution for its workload domains, which are logical pools of resources that can be used to run different types of workloads. The other options are not correct. VMware Horizon, VMware Telco Cloud Automation, and VMware Aria Automation are VMware solutions that do not require vSAN usage, although they can benefit from it. VMware Horizon is a platform that delivers virtual desktops and applications across a variety of devices and locations, and it can use any supported storage solution, including vSAN. VMware Telco Cloud Automation is a cloud-native orchestration and automation platform that enables communication service providers to accelerate the deployment and lifecycle management of network functions and services across any network and cloud. It can use any supported storage solution, including vSAN. VMware Aria Automation is not a valid VMware solution name.
References: VMware Cloud Foundation Overview; VMware Horizon Overview; VMware Telco Cloud Automation Overview
NEW QUESTION # 43
A vSAN administrator has a vSAN cluster that is using vSphere Lifecycle Manager (vLCM) to manage hypervisor, server drivers, and firmware. All hosts in the cluster are compliant according to the vLCM image.
A 10GB NIC on the servers is experiencing issues, and the vSAN administrator determines a new network driver will resolve the problem. Unfortunately, the required NIC driver is a newer version compared to the driver provided by the most recent Vendor Add-on.
Which action should the vSAN administrator take to ensure the latest network driver is installed on the NIC before remediation?
- A. Add an individual component to the vLCM image that has the updated NIC driver
- B. Modify the vLCM image to omit the NIC Driver, and then manually update the servers with the required NIC driver
- C. Remove theVendor Add-on from the vLCM image, and then manually install the network driver on the servers
- D. Make sure the vLCM image is configured to use the most recent version of the Vendor Add-on
Answer: A
Explanation:
Explanation
To ensure the latest network driver is installed on the NIC before remediation, the vSAN administrator should add an individual component to the vLCM image that has the updated NIC driver. This action allows the administrator to override the driver provided by the vendor add-on and use a newer version that is compatible with the ESXi version and the hardware device. The administrator can add an individual component to the vLCM image by importing it from a ZIP file or selecting it from the vLCM depot. The other options are not correct. Making sure the vLCM image is configured to use the most recent version of the vendor add-on will not help, as the required NIC driver is a newer version than the one provided by the vendor add-on. Removing the vendor add-on from the vLCM image or modifying the vLCM image to omit the NIC driver will not ensure the latest network driver is installed on the NIC, as these actions will leave the NIC without any driver update. Manually installing or updating the network driver on the servers is not recommended, as it might cause inconsistency and non-compliance in the vLCM image. References: vSphere Lifecycle Manager Image Components; [Add an Individual Component to an Image]
NEW QUESTION # 44
vSAN requires that the virtual machines deployed on the vSAN datastores are assigned at least one storage policy, but the administrator did not explicitly assign a storage policy when provisioning the new VM.
What is the result of this situation?
- A. No data protection will be applied to the VM objects.
- B. The vSphere Web Client will choose the last vSAN Storage Policy used.
- C. The VM provisioning will fail.
- D. The VM objects will be protected based on the vSAN Default Storage Policy configurations.
Answer: D
Explanation:
Explanation
If the administrator did not explicitly assign a storage policy when provisioning a new VM on a vSAN datastore, the result is that the VM objects will be protected based on the vSAN Default Storage Policy configurations. The vSAN Default Storage Policy is assigned to all VM objects if no other vSAN policy is assigned when provisioning a VM. The default policy contains vSAN rule sets and a set of basic storage capabilities, such as Failures to tolerate set to 1, Number of disk stripes per object set to 1, and Thin provisioning. The other options are not correct. The VM provisioning will not fail, as vSAN requires that every VM has at least one storage policy. The vSphere Web Client will not choose the last vSAN Storage Policy used, as it will always apply the default policy if no other policy is selected. No data protection will not be applied to the VM objects, as they will have at least one replica based on the default policy.
References: About the vSAN Default Storage Policy; Using vSAN Policies
NEW QUESTION # 45
The DevOps team of an organization wants to deploy with persistent storage on a dedicated vSAN cluster. The storage administrator is tasked to configure the vSAN cluster and leverage the vSAN Direct feature.
Which two requirements must the administrator meet to complete this task? (Choose two.)
- A. A dedicated network for vSAN Direct
- B. Unclaimed disks in the hosts forvSAN Direct
- C. HA enabled on the vSAN cluster
- D. A valid vSAN license for the vSAN cluster
- E. An integration with vSAN File Services
Answer: B,D
Explanation:
Explanation
To configure vSAN Direct, the administrator must meet two requirements: a valid vSAN license for the vSAN cluster and unclaimed disks in the hosts for vSAN Direct. A vSAN license is required to enable vSAN features and services, including vSAN Direct. Unclaimed disks are local storage devices that are not used by vSAN or any other service, and can be claimed by vSAN Direct to create datastores for persistent storage. The other options are not requirements for vSAN Direct. HA is an optional feature that can be enabled on any cluster, but is not specific to vSAN Direct. A dedicated network for vSAN Direct is not necessary, as vSAN Direct uses the same network as vSAN. An integration with vSAN File Services is not required, as vSAN Direct does not provide file shares, but block storage. References: Set Up vSAN Direct for vSphere with Tanzu; vSAN Licensing Guide
NEW QUESTION # 46
A vSAN administrator of a non-internet connected vSAN environment wants to upgrade the environment from the vSAN 7.0 U3 to the vSAN 8.0 using vLCM.
Which option, if any, should be used as a depot in this case?
- A. Configure the vSphere Lifecycle Manager to download updates from a local UMDS-shared repository.
- B. Configure the vSphere Lifecycle Manager to download the updates from the VMware Depot using HTTPS.
- C. Configure the vSphere Lifecycle Manager to download the updates from an Online Depot.
- D. It is not possible to use the vSphere Lifecycle Manager on a non-internet connected environment.
Answer: A
Explanation:
Explanation
To upgrade the vSAN environment from vSAN 7.0 U3 to vSAN 8.0 using vLCM in a non-internet connected environment, the administrator should configure the vSphere Lifecycle Manager to download updates from a local UMDS-shared repository. UMDS stands for Update Manager Download Service, which is a component of vSphere Lifecycle Manager that can be used to download patches and updates for ESXi hosts, virtual appliances, and VMware Tools from the VMware online depot and store them in a shared repository. The administrator can then configure the vSphere Lifecycle Manager to use the UMDS-shared repository as a custom depot for patching and upgrading the vSAN cluster. This option allows the administrator to perform offline upgrades without requiring internet access for the vSAN cluster12 References: 1: VMware vSphere Lifecycle Manager Administration, page 22 2: VMware vSphere Update Manager Download Service, page 5
NEW QUESTION # 47
An architect is designing a vSAN stretched cluster and needs to ensure that data remains on a given site in case of a network partition between the sites.
Which configuration would do this?
- A. Preferred and secondary sites
- B. Distributed Resource Scheduler
- C. IvSoh ere High Availability
- D. vCenter High Availability
Answer: A
Explanation:
Explanation
In a vSAN stretched cluster configuration, both data sites are active sites, but one site must be designated as the preferred site and the other site as the secondary or nonpreferred site. This configuration helps to ensure that data remains on a given site in case of a network partition between the sites. If the network connection between the two active sites is lost, vSAN continues operation with the preferred site, unless it is resyncing or has another issue. The site that leads to maximum data availability is the one that remains in operation. The other options are not relevant to this scenario. References: Introduction to Stretched Clusters; vSAN Stretched Cluster Guide
NEW QUESTION # 48
In which type of environment is vSAN storage used as a mandatory, primary storage?
- A. VMware Horizon
- B. VMware Cloud on AWS
- C. TanzuKubernetes Grid Integrated Edition
- D. VMware Aria Automation
Answer: B
Explanation:
Explanation
VMware Cloud on AWS is a service that delivers a fully managed VMware SDDC on AWS infrastructure. It uses vSAN as the mandatory, primary storage for the SDDC clusters. vSAN provides a high-performance, resilient, and secure shared storage solution for the VMware Cloud on AWS environment. The other options are not correct, as vSAN is not mandatory or primary for them. VMware Horizon, VMware Aria Automation, and Tanzu Kubernetes Grid Integrated Edition can use vSAN as an optional or secondary storage solution, but they can also use other types of storage. References: , section 1.1; , section 1.2
NEW QUESTION # 49
An administrator is deploying a new two-node vSAN cluster with a shared witness to a remote location.
Which requirement must be met?
- A. The ESXi hosts must have SSDs or NVMe configured for Virtual Flash File System.
- B. The ESXi host's controller cache and advanced features must be disabled.
- C. The ESXi hosts must have a minimum of 64 GBs of memory.
- D. The ESXi host's drives must be configured in RAID 1 to support Failures to Tolerate of 1.
Answer: C
Explanation:
Explanation
To deploy a new two-node vSAN cluster with a shared witness, the administrator must meet several requirements, one of which is that the ESXi hosts must have a minimum of 64 GBs of memory. This is because each host must have enough memory to run the VMs and also to support the vSAN metadata overhead. The other options are not requirements for a two-node vSAN cluster with a shared witness. The ESXi hosts do not need SSDs or NVMe for Virtual Flash File System, as they can use any supported storage devices for vSAN. The ESXi host's controller cache and advanced features do not need to be disabled, as they can be used to improve performance and reliability. The ESXi host's drives do not need to be configured in RAID 1, as vSAN uses its own software-defined RAID mechanism to provide Failures to Tolerate.
References: Shared Witness for 2-Node vSAN Deployments; Two-Node Cluster Requirements
NEW QUESTION # 50
An administrator is upgrading multiple vSAN Witness nodes with vLCM (single image management) that are used for vSAN Stretched and two-node Clusters.
What two witness node types can the administrator upgrade? (Choose two.)
- A. Shared witness node
- B. Dedicated witness node
- C. Appliance witness node
- D. Nested witness node
- E. Physical witness node
Answer: C,D
Explanation:
Explanation
To upgrade multiple vSAN Witness nodes with vLCM (single image management) that are used for vSAN Stretched and two-node Clusters, the administrator can upgrade two witness node types: appliance witness node and nested witness node. An appliance witness node is a virtual ESXi host that runs on a physical ESXi host and contains the witness components of VM objects stored in the vSAN cluster. A nested witness node is a virtual ESXi host that runs on another virtual ESXi host and contains the witness components of VM objects stored in the vSAN cluster. Both types of witness nodes can be managed by vLCM as independent nodes since vSphere 7.0 Update 3, as long as they are version 7.0 Update 2 or later. The other options are not correct. A shared witness node is a witness node that serves multiple vSAN clusters, which is not supported by vLCM. A dedicated witness node is a witness node that serves only one vSAN cluster, which is not a specific type of witness node. A physical witness node is aphysical ESXi host that contains the witness components of VM objects stored in the vSAN cluster, which cannot be upgraded by vLCM. References: vSphere Lifecycle Manager and the vSAN Witness Hosts; Shared Witness for 2-Node vSAN Deployments
NEW QUESTION # 51
How often does the Skyline Health interval validate online if there are new Health Checks available for vSAN?
- A. Every 24 hours
- B. Every 12 hours
- C. Every 4 hours
- D. Every 1 hour
Answer: A
Explanation:
Explanation
The Skyline Health interval validates online if there are new Health Checks available for vSAN every 24 hours. This means that vSAN checks for new health checks from VMware Analytics Cloud once a day and updates the vSAN Health Service accordingly. The other options are not correct, as they do not match the actual frequency of the online validation. References: About the vSAN Skyline Health
NEW QUESTION # 52
An administrator has successfully deployed a vSAN Stretched Cluster and needs to ensure that any virtual machines that are created are placed in the appropriate site.
Which two steps are needed to complete this task? (Choose two.)
- A. Create a single VM/Host group across both sites
- B. Create VM/Host groups for the two sites
- C. Create a storage policy that includes site affinity rules and apply to VMs
- D. Put the VMs in a vSphere DRS group
- E. Put the VMs in the correct VM group
Answer: B,C
Explanation:
Explanation
To ensure that any virtual machines that are created are placed in the appropriate site, the administrator needs to create VM/Host groups for the two sites and create a storage policy that includes site affinity rules and apply to VMs. VM/Host groups allow the administrator to group virtual machines and hosts based on their location or preference. Site affinity rules specify which site a virtual machine should be placed on or prefer to run on. A single VM/Host group across both sites would not allow the administrator to control the placement of virtual machines. Putting the VMs in a vSphere DRS group or in the correct VM group would not affect their site affinity. References: 1, page 12; 2, section 3.2
NEW QUESTION # 53
......
Achive your Success with Latest 5V0-22.23 Exam: https://www.realvce.com/5V0-22.23_free-dumps.html
Achieve The Utmost Performance In 5V0-22.23 Exam Pass Guaranteed: https://drive.google.com/open?id=1cKuY5Tea4ip7KmlaeZt5CaZW21mp4Doz