[2021] VMCE2020 by VMCE Actual Free Exam Practice Test
Free VMCE VMCE2020 Exam Question
How much Veeam VMCE2020: Veeam Certified Engineer 2020 Exam Cost
The cost of the Veeam Exam is USD 150. For more information related to exam prices, please visit the official website Veeam Website as the cost of exams may be subject to vary county-wise.
Objectives of the Veeam VMCE2020 Test
The Veeam VMCE2020 exam’s attention is on different subjects that include key concepts of creating a strategy for successful backup, building backup capabilities, the creation of replication capabilities, 3-2-1 strategy, and testing backup as well as replication. Other topics talk about how to restore from backup, recovery from a replica, and handle monitoring in addition to reporting. The mandatory training and study guides are what you need when wishing to enhance your preparedness.
NEW QUESTION 29
When a replication job is configured to use the replica mapping feature (no seeding), what will happen during the first run of the job?
- A. The replication job calculates the differences between the original and mapped VM; only the incremental changes will be synchronized
- B. The replication job will first restore the VM from the most recent restore point and then start to synchronize the incremental changes from the source infrastructure
- C. The replication job creates a clone of the mapped replica to preserve the original state before synchronizing the changes from the source infrastructure
- D. If a VM within the replication job is not mapped, the job will fail
Answer: A
Explanation:
Explanation/Reference: https://helpcenter.veeam.com/docs/backup/hyperv/replica_seeding_hv.html?ver=100
NEW QUESTION 30
A Veeam backup administrator, protecting all VMs in a VMware environment with backups and replicas, has been requested to run a multi-server application in an On-Demand Sandbox. The sandbox needs to stay powered on, uninterrupted, for 30 days while daily backups and replicas continue to run. How can this be done?
- A. Create an application group and leverage regular backup restore points as the source for the application group
- B. Create a (secondary) replication job for the required VMs that are not scheduled to run; create a SureBackup job and use these replicas as the source
- C. Create an application group and leverage regular replica restore points as the source for the application group
- D. Create a (secondary) replication job for the required VMs that are not scheduled to run; make an application group and use these replicas as the source
Answer: B
NEW QUESTION 31
If you need to run a script to stop a service in order to get an application-consistent backup on a Windows server, where can the script be run?
- A. Configure the script to run on the Veeam Backup & Replication server using the Windows Task Scheduler
- B. In the virtual machines setting of the job, add a script in the scripts tab under "Run the following script before the job:"
- C. In the guest processing setting of the job, enable application-aware processing and add a pre-freeze script to the VM
- D. Copy the script to the VM and schedule the script to run prior to the start of the backup job using the Windows Task Scheduler in the VM
Answer: C
NEW QUESTION 32
What are the three Veeam Backup & Replication technologies required to verify recoverability of the backup?
(Choose three.)
- A. Virtual lab
- B. Backup proxy
- C. Application group
- D. SureBackup job
- E. Gateway Server
- F. Replication job
Answer: A,C,D
NEW QUESTION 33
A backup administrator is planning to install Veeam ONE. Which data collection mode collects the most data per VM?
- A. For backup data only
- B. Optimized for advanced scalability deployment
- C. Optimized for typical deployment
- D. For vCenter data only
Answer: C
NEW QUESTION 34
A NAS backup job has been configured within Veeam Backup & Replication, and is completing successfully, but restore operations have been failing for the last few days. What is causing the failure?
- A. The cache repository assigned for this file share is unavailable for restore operations
- B. The credentials added to the share are not allowed read-write access to the share, directories or files
- C. The server was added by using an IQN alias which is unable to be resolved
- D. The backup repository is sealed
Answer: B
NEW QUESTION 35
When you back up regular or standalone VMs in vCloud Director, which of the following is captured and stored in Veeam's Backup & Replication backup file? (Choose three.)
- A. VM metadata
- B. VM disk content
- C. Linked clone VM's prior to vCenter 6.5
- D. Raw device mapping
- E. vApp metadata
- F. In-guest iSCSI disk
Answer: A,B,E
NEW QUESTION 36
Which storage optimization option uses a block size of 512 KB?
- A. LAN target
- B. Local target
- C. Local target (large blocks)
- D. WAN target
Answer: A
Explanation:
Explanation/Reference: https://helpcenter.veeam.com/docs/backup/hyperv/compression_deduplication.html?ver=100
NEW QUESTION 37
A company has separate networks for management traffic and data traffic. All Veeam components are communicating over the management network. How would they define the data network for backup data transfers?
- A. Re-add all Veeam components involved in data transfer through the required interfaces
- B. Update routing tables on the components involved in data transfer
- C. Use the preferred network settings to switch to data network for the backup traffic
- D. Create a global network traffic rule, set appropriate source and target IP range
Answer: C
Explanation:
Explanation
https://helpcenter.veeam.com/docs/backup/vsphere/select_backup_network.html?ver=100
NEW QUESTION 38
What are the three Veeam Backup & Replication technologies required to verify recoverability of the backup?
(Choose three.)
- A. Virtual lab
- B. Backup proxy
- C. Replication job
- D. Application group
- E. SureBackup job
- F. Gateway Server
Answer: A,C,E
NEW QUESTION 39
A company has replicated their critical application VMs to a second data center in another region. Their key application includes two database VMs and three application VMs. For proper operation, the database VMs need to start before the application VMs. What needs to be configured in Veeam to prepare for a disaster recovery situation?
- A. Use on-click failover
- B. Use a planned failover
- C. Use a failover plan
- D. Use Instant VM Recovery
Answer: C
NEW QUESTION 40
An end user has deleted a business-critical document and they need it back right away. The IT team has been doing hypervisor-level backups of the VM that the document was on. What is the fastest option for this backup administrator to get the user's document back?
- A. Virtual disks restore
- B. Entire VM restore
- C. Instant VM Recovery
- D. Guest files restore
Answer: B
NEW QUESTION 41
Which of the following scenarios properly applies the 3-2-1 rule to backup jobs?
- A. Use backup jobs to back up directly to tape; ship the tapes off site
- B. Use a backup job to back up to a local repository; perform a backup copy job to a repository in another location
- C. Use a backup job to back up to a Scale-out Backup Repository configured with capacity tier using AWS S3 and enable move mode
- D. Use a backup job to back up to a local repository; perform a backup copy job to the same repository
Answer: D
NEW QUESTION 42
A virtual machine in your environment has been hit by a virus. You need to restore the virtual machine as fast as possible. At the same time, you need to make sure that any dormant virus on the backed up virtual machine is detected. What restore method should you use when recovering to a new location?
- A. Instant VM Recovery with "secure restore"
- B. Instant VM Recovery with "staged restore"
- C. SureBackup
- D. Virtual disk restore
Answer: A
NEW QUESTION 43
A company needs to maintain and verify backups at a secondary site to meet the following requirements:
RTO of two hours, RPO of 12 hours, four weeks retention. Which of the following backup copy job configurations meets these requirements?
- A. Periodic backup copy job, scheduled for a two-hour interval, with 112 restore points to retain
- B. Periodic backup copy job, scheduled for a 12-hour interval, with 56 restore points to retain
- C. Periodic backup copy job, scheduled for a 12-hour interval, with 112 restore points to retain
- D. Periodic backup copy job, scheduled for a two-hour interval, with 56 restore points to retain
Answer: D
NEW QUESTION 44
You fail back a VM replica to the original location. Which of the following requirements needs to be met to be able perform quick rollback during a failback of a replica?
- A. Indexing must be enabled for the original VM
- B. Perform failback to VM within the same subnet
- C. The VM replica must be created with the "Use Changed Block Tracking data" option enabled
- D. The VM replica must have access to the repository where the full backup of the VM resides
Answer: C
NEW QUESTION 45
A backup administrator needs to restore two data drives to a VM where the operating system remains intact.
The target machine must remain powered on. What recovery option is most appropriate to perform this operation?
- A. Instant VM Recovery
- B. Restore VM files
- C. Restore entire VM
- D. Instant disk recovery
Answer: D
Explanation:
Explanation
https://helpcenter.veeam.com/docs/backup/vsphere/instant_disk_recovery.html?ver=100
NEW QUESTION 46
Your company is using Veeam ONE to monitor VM performance in real time. An end user has called to complain about the performance of a VM and has asked you to investigate the cause of the issue. Where in Veeam ONE do you go to view real time VM metrics?
- A. In the monitor client under the data protection view
- B. In the monitor client under the infrastructure view
- C. In the reporter portal in the dashboards tab, VM performance dashboard
- D. In the reporter portal in the workspace tab, VM performance
Answer: A
NEW QUESTION 47
A Veeam backup administrator, protecting all VMs in a VMware environment with backups and replicas, has been requested to run a multi-server application in an On-Demand Sandbox. The sandbox needs to stay powered on, uninterrupted, for 30 days while daily backups and replicas continue to run. How can this be done?
- A. Create a (secondary) replication job for the required VMs that are not scheduled to run; create a SureBackup job and use these replicas as the source
- B. Create an application group and leverage regular replica restore points as the source for the application group
- C. Create a (secondary) replication job for the required VMs that are not scheduled to run; make an application group and use these replicas as the source
- D. Create an application group and leverage regular backup restore points as the source for the application group
Answer: D
NEW QUESTION 48
A company has the following requirements:
Mission-critical VMs: hourly replication to disaster recovery site, daily backups of these VMs should be available at the disaster recovery site when required, the mission critical applications need to be available within 20 minutes.
Business-important VMs: daily backups should be stored at the disaster recovery site. When required, the business-important applications need to be available within four hours.
Define the RPO and RTO for the company's disaster recovery site.
- A. Mission-critical VMs: RPO = 60 minutes, RTO = 20 minutes; business-important VMs: RPO = 24 hours, RTO = four hours
- B. Mission-critical VMs: RPO = 60 minutes, RTO = one hour; business-important VMs: RPO = 60 minutes, RTO = four hours
- C. Mission-critical VMs: RPO = 24 hours, RTO = 20 minutes; business-important VMs: RPO = 24 hours, RTO
= four hours - D. Mission-critical VMs: RPO = 24 hours, RTO = four hours; business-important VMs: RPO = 24 hours, RTO
= four hours
Answer: B
NEW QUESTION 49
You use datastores as the source for your backup jobs. Some VM backups are consuming too much repository disk space. They have backup files created by multiple backup jobs. What could be the reason?
(Choose two.)
- A. VM retention is set to do full backups more often than others in the job
- B. VMware Storage DRS (Distributed Resource Scheduler) moved VMs to different datastores
- C. Jobs are configured as per VM and these particular VM's need more fulls
- D. The VMs were moved to different datastores manually
- E. The VM is in a backup chain and trapped inside a single retention file
Answer: C,D
NEW QUESTION 50
When configuring a SureBackup job, what are some of the criteria for adding servers to an application group? (Choose two.)
- A. VMs cannot be added to an application group twice
- B. VMs must be running the same OS version
- C. VMs must have at least one valid restore point
- D. VM backups must reside on the same repository
- E. VMs cannot be encrypted
Answer: A,C
Explanation:
Explanation/Reference: https://helpcenter.veeam.com/docs/backup/vsphere/appgroup_vms_vm.html?ver=100
NEW QUESTION 51
A backup administrator is deploying a Veeam ONE environment. They have chosen to use separate servers from their Veeam Backup & Replication environment. What benefit will they receive if they install the Veeam ONE Agent onto their backup server?
- A. Track whether VMs and agents are properly protected and following the 3-2-1 rule
- B. Collect Veeam Backup & Replication logs and execute remediation actions
- C. Analyze Veeam Backup & Replication log data and retrieve signature updates
- D. Collect virtual environment configuration from Veeam Backup & Replication
Answer: D
NEW QUESTION 52
......
What Certification to Achieve by Passing VMCE2020
Those taking VCME2020 exam and attaining the passing grades will earn the Veeam Certified Engineer (VMCE) 2020 certificate. This document has no expiry, but in the case of ProPartners, there could be a requirement for them to have their accreditations renewed. This will validate that the certification remains up-to-date so that there is compliance with the program for Veeam ProPartner.
Veeam VMCE2020 Actual Questions and Braindumps: https://www.realvce.com/VMCE2020_free-dumps.html