Many people know getting H3C certification is very useful for their career but they fear failure because they hear it is difficult. Now I advise you to purchase our GB0-372-ENU premium VCE file. If you are not sure you can download our GB0-372-ENU VCE file free for reference. Please trust me if you pay attention on our GB0-372-ENU dumps VCE pdf you will not fail. We can guarantee you pass GB0-372-ENU exam 100%.

Why do we have this confidence to say that we are the best for GB0-372-ENU exam and we make sure you pass exam 100%? Because our premium VCE file has 80%-90% similarity with the real H3C GB0-372-ENU questions and answers. Once you finish our GB0-372-ENU dumps VCE pdf and master its key knowledge you will pass GB0-372-ENU exam easily. If you can recite all GB0-372-ENU dumps questions and answers you will get a very high score. Our standard is that No Help, Full Refund. No pass, No pay.

Instant Download: Our system will send you the GB0-372-ENU braindumps file you purchase in mailbox in a minute after payment. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

H3CSE-RS-SW Sample Questions:

1. In the basic AAA implementation structure shown in the figure, which of the following services provided by the access server can be provided with security guarantees by AAA? (Multiple choice)

A) PPP
B) FTP
C) Port access
D) SSH

2. XYZ Company requires to build its network based on modular enterprise network architecture. XYZ Company has a research and development base in Shenzhen and Xi'an, an office building in Beijing and Shanghai, offices with more than 50 people in 23 provincial capitals, and technicians on business trips in
23 provincial capitals. Due to environmental and cost issues, some offices cannot connect to the headquarters through dedicated lines or packet switching wide area network connections. Based on these conditions, which of the following network module that XYZ Company should have? (Multiple choice)

A) VPN access
B) Large branch network
C) Dedicated line and packet switching access
D) Remote | Distributed Office Network

3. NTP uses a hierarchical approach to define clock accuracy. Which of the following descriptions of clock hierarchies are correct? (Multiple choice)

A) Usually the clock stratum of an atomic clock is 0
B) The smaller the clock layer number, the higher the accuracy
C) The larger the number of clock layers, the higher the accuracy
D) When the clock stratum is 16, it means the clock is not synchronized.

4. Switches SWA and SWB are connected together through two optical fiber Gigabit Ethernet links, and the following interface configuration is available on switch SWA:
[SWA] interface GigabitEthernet 1/0/1
[SWA-GigabitEthernet1/0/1] gvrp
[SWA-GigabitEthernet1/0/1] port link-type trunk
[SWA-GigabitEthernet1/0/1] port trunk permit vlan 1 10
[SWA] interface GigabitEthernet 1/0/2
[SWA-GigabitEthernet1/0/2] port link-type trunk
[SWA-GigabitEthernet1/0/2] port trunk permit vlan 1 10
If you want to configure link aggregation to aggregate these two links, if the configuration on SWB is correct, which of the following you can know from the above information?

A) Only when all VLANs are allowed to pass through GigabitEthernet1/0/2 and Gigabit1/0/1, can the two be added to the same aggregation group.
B) After link aggregation is configured on SWA and SWB, if both SWA and SWB enable MSTP on the aggregation port, one of GigabitEthe1/0/1 and GigabitEthe1/0/2 will be blocked.
C) Only when the configuration of GigabitEthe1/0/2 is changed to be consistent with that of GigabitEthe1/0/1, can the two be added to the same aggregation group.
D) After link aggregation is configured on SWA and SWB, if both SWA and SWB enable MSTP on the aggregation ports, GigabitEthernet1/0/1 and GigabitEthe1/0/2 can participate in forwarding.

5. The Ethernet1/0/1 port of switch SWA is configured as follows:
Interface Ethernet 1/0/1 port link-type trunk
Port trunk permit vlan 10 port trunk pvid vlan 20
Now we need to change the Ethernet 1/0/1 port of switch SWA to a Hybrid port, with PVID of VLAN 20, and tag the data frames sent from VLAN 10. Which of the following configuration processes is correct?
(Multiple choice)

A) [SWA-Ethernet1/0/1] port link-type hybrid
B) None of the above is correct
C) [SWA-Ethernet1/0/1] portlink-type access
[SWA-Ethernet1/0/1] port link-type hybrid
[SWA-Ethernet1/0/1] port hybrid pvid vlan 20
[SWA-Ethernet1/0/1] port hybrid vlan 10 tagged
D) [SWA-Ethernet1/0/1] undoportlink-type
[SWA-Ethernet1/0/1] portlink-type hybrid
[SWA-Ethernet1/0/1] port hybrid pvid vlan 20
[SWA-Ethernet1/0/1] port hybrid vlan 10 tagged
E) [SWA-Ethernet1/0/1] portlink-type access
[SWA-Ethernet1/0/1] port access vlan 20
[SWA-Ethernet1/0/1] port link-type hybrid
[SWA-Ethernet1/0/1] port hybrid vlan 10 tagged

Solutions: