Correct Answer:

See Explanation below for all solution
Explanation:
Objective
The purpose of this task is to create a Communication System for the integration scenario Bank Integration with File Interface (1EG).
This communication system will later be used in the communication arrangement and will reference the communication user created in the previous task.
Business Scenario Explanation
In this scenario, you are setting up:
Bank Integration with File Interface (1EG)
In SAP S/4HANA Cloud, the technical setup typically requires:
a Communication User
a Communication System
a Communication Arrangement
In Task 13, you created the communication user.
In Task 14, you now create the communication system and link that previously created communication user for inbound communication.
The communication system represents the external or technical integration partner definition used in the scenario.
Important Notes
Always replace ###### with the last 6 digits of your group number.
Use the exact values shown in the task.
Do not change capitalization, underscores, or spacing.
The communication user assigned in this task must be the one created in the previous step:
1EG_COMM_USER_######
Required Values
Use the following values exactly as shown in the task image.

Example
If your suffix is 000013, then the values become:
System ID = 1EG_SYSTEM_000013
System Name = Bank Integration with File Interface
Host Name = DUMMY
Inbound Communication User = 1EG_COMM_USER_000013
Step 1: Open the app "Communication Systems"
From the SAP S/4HANA Cloud launchpad:
Log in to SAP S/4HANA Cloud.
Use the search bar or app finder.
Search for:
Communication Systems
Open the app.
Explanation:
This app is used to create and maintain technical communication systems for integration scenarios.
Because the task explicitly asks to create a Communication System, this is the correct app.
Step 2: Start creating a new Communication System
Inside the Communication Systems app:
Click:
New
Explanation:
This starts the creation of a new communication system record.
Step 3: Enter the System ID
In the communication system creation screen, enter:
System ID = 1EG_SYSTEM_######
Example
If your suffix is 000013, enter:
1EG_SYSTEM_000013
Explanation:
This is the technical ID of the communication system.
It must exactly match the task requirement.
Step 4: Enter the System Name
In the System Name field, enter exactly:
Bank Integration with File Interface
Explanation:
This is the descriptive name of the communication system and must be entered exactly as provided.
Step 5: Enter the Host Name
In the Host Name field, enter exactly:
DUMMY
Explanation:
For this simulation, the host is not a real productive endpoint.
The task explicitly requires the placeholder value DUMMY.
Step 6: Maintain the inbound communication user
Locate the section for:
Users for Inbound Communication
Then:
Click Add or select the entry field/value help
Choose the communication user created in the previous task:
1EG_COMM_USER_######
Example
If your suffix is 000013, select:
1EG_COMM_USER_000013
Explanation:
This is a critical link between the communication user and the communication system.
Without assigning the previously created communication user, the communication system setup is incomplete.
Step 7: Verify the inbound user assignment
After adding the inbound communication user, confirm that the selected user is:
1EG_COMM_USER_######
Explanation:
This confirms that the system will use the correct technical user for inbound communication in the later communication arrangement.
Step 8: Review all entered values
Before saving, check the following:
System ID = 1EG_SYSTEM_######
System Name = Bank Integration with File Interface
Host Name = DUMMY
Users for Inbound Communication = 1EG_COMM_USER_######
Explanation:
This review helps avoid validation issues caused by incorrect naming, missing underscores, or selecting the wrong communication user.
Step 9: Save the Communication System
Click:
Save
Explanation:
This finalizes the creation of the communication system.
Without saving, the communication system will not exist for the next task.
Step 10: Verify the saved Communication System
After saving, confirm that the communication system exists and displays the correct values:
1EG_SYSTEM_######
Bank Integration with File Interface
Host = DUMMY
inbound user = 1EG_COMM_USER_######
Explanation:
This confirms the system is successfully created and ready for the communication arrangement setup in the next step.
Expected Result
After this task is completed successfully:
the communication system exists,
the system ID matches the required naming pattern,
the system name is correct,
the host name is DUMMY,
the previously created communication user is assigned for inbound communication, the system is saved successfully.

Correct Answer:

See Explanation below for all solution
Explanation:
Objective
The purpose of this task is to assign the Project Manager - Professional Services business role to the newly created test user so that the user can perform the professional-services processes required during the Fit-to-Standard workshop.
The required business role is:
Business Role ID: BR_PROJECT_MANAGER_PROF
Business Role Description: Project Manager - Professional Services
Business Scenario Explanation
In the previous task, a new test user was created for demonstrating professional services processes.
That new user now needs the correct project-manager authorization.
Without this business role, the test user will not have access to the project-manager apps, pages, and processes needed for the workshop demonstration.
This task connects the newly created user to the standard professional-services project manager role.
Important Notes
Always replace ###### with the last 6 digits of your group number.
Use the exact values as required.
The business role ID must be:
BR_PROJECT_MANAGER_PROF
Do not use a similar role or partial match.
Save at the end, otherwise the assignment remains incomplete.
Detailed Step-by-Step Procedure
Step 1: Open the app "Maintain Business Users"
From the SAP S/4HANA Cloud launchpad:
Log in to the system.
Use the app search.
Search for:
Maintain Business Users
Open the app.
Explanation:
This app is used to maintain business users and assign business roles.
Since the new user was created in the previous task, this is the correct app to assign the new role.
Step 2: Search for the newly created Project Manager test user
In Maintain Business Users:
In the filter/search area, enter the user name of the new test user.
The required user name format is:
PM######

Example
If your group number suffix is 0000457, then search for:
PM0000457
Click Go.
Explanation:
You must open the newly created project manager test user, not your own user.
The role assignment in this task belongs to the imported test user created in Task 4.

Step 3: Open the new business user record
From the search results:
Click the user entry with:
User Name = PM######
Open the detail page.
Explanation:
This opens the worker/business user record where the Project Manager role will be assigned.

Step 4: Verify that you are on the correct user
Before editing, confirm the business user details are correct.
Typical expected values are:
User Name = PM######
First Name = Project
Last Name = Manager ######
E-Mail = PM######@dummy.sap.com
Explanation:
This check is important because assigning the role to the wrong user would cause the simulation validation to fail.
Step 5: Switch to Edit mode
On the business user detail page:
Click Edit
Explanation:
Edit mode is required so the role list can be changed.
Step 6: Open the "Assigned Business Roles" tab
Inside the business user record:
Click the tab:
Assigned Business Roles
Explanation:
This tab shows all roles currently assigned to the new test user and is the correct place to add the project manager role.
Step 7: Click Add
In the Assigned Business Roles section:
Click Add
The system opens the popup:
Add Business Roles
Explanation:
This popup is used to search and add standard SAP-delivered business roles to the user.
Step 8: Search for the Project Manager role
In the Add Business Roles popup:
In the filter field for business role ID, enter:
BR_PROJECT_MANAGER_PROF
Click Go
Select:
Project Manager - Professional Services
Business Role ID: BR_PROJECT_MANAGER_PROF
Explanation:
This is the exact standard business role required by the task.
It provides the professional-services project manager access for the test user.


Step 9: Add the role
After selecting the role:
Click OK or Apply
Explanation:
At this point, the role is added to the user in draft mode, but the change is not yet final until saved.
Step 10: Save the business user
Back on the user detail page:
Click Save
Explanation:
This is the final required step.
If you do not save, the role assignment will not be stored and the task will not be completed successfully.

Step 11: Verify the assignment
After saving, confirm that the user now has the role:
Project Manager - Professional Services
BR_PROJECT_MANAGER_PROF
Explanation:
This confirms that the new test user is now properly prepared for later professional-services process demonstrations.
Expected Result
After the task is completed:
the new test user PM###### exists,
the role BR_PROJECT_MANAGER_PROF is assigned,
the user is saved successfully,
the user can later be used as a professional-services project manager in the workshop scenario.